Counting matching models…
Best printed with 0.4mm nozzle in PETG 0.2mm layer height for the container and 0.15mm the threaded section. Put an Insert of TPU filament into the container to make it water and airtight. (not scientifically tested)
I've been printing with the Original Lack Enclosure for a while now, and I wanted a new enclosure with a better air seal to hold a higher ambient temperature for printing as well as for use with a activated carbon VOC filter. A lot of…
Parametric sealed gift box. Use the Onshape file link and modify the variables to change the box size. Provided model is 34mm cubed inner volume with 3mm thick walls for a 40mm cubed outer volume. This is a balance of strength and…
Prints in place with only supports for the bolt tabs (at least on my MK4s printer) I have test fit this in my car and it fits great, can't test it with a speaker for a few more weeks/months due to the car being restored Drivers door…
I have not tested these with speakers as my car is currently stripped for restoration, but test fits show these to fit perfectly Category: Automotive
31/08/2025 - // Update - Added Different Gasket/ Seal(s) for those who need or prefer different ones. Part Dimensions: Lid + Bottom - 4.75 in. Tall, 3 in Diameter Bottom - 4.35 in. Tall, 3 in. Diameter Lid - 0.75 in. Tall, 3in. Diameter…
The tappet of the Surefeed Sealed Pet Bowl is a bit weak, becomes brittle over the time and breaks after a few years. This part can replace this tappet making the bowl working again. For better stability and to prevent the need of…
Fits on MINI beds. Internal support design for a safe and strong place to dispose of your used needles. One-way door. Clear, raised labeling helps prevent accidents. Don't push too hard or you will bend the door. Just slip the capped…
I typically get small bills for my little projects for people. So i figured I would stash them in a way i wont spend them till they stack up. Wasnt a existing file i liked, so i'll share mine. Made for Canadian bills. Printed standing…
This is a poop chute container upgrade for the Anycubic Kobra S1 . The containers are airtight and available in three sizes: Small, Medium, and Large . Thanks to the sealed lid , the container can also help improve the overall enclosure…
Printed at 0.2mm layer height and 15% Gyroid infill on a Flashforge AD5M. Sealed with paint (research how to paint 3D prints before painting). I printed with PLA, which isn't the greatest for UV exposure, so a couple layers of paint are…
Gridfinity compatible sealed container. Container/Lid: 0.2mm Layer height PLA/ABS/PETG O-Ring: 0.2mm Layer height TPU PETG/ABS recommend if you want to dry desicant in it.
This is a model from the game Crimson Desert. A sealed artifact from The Abyss. Which I recreated with the same engravings. I made two variants, one with smooth edges on all the engravings, the other is sharp (in the pictures it's the…
I've been looking to better seal the otherwise leaky Q2 for printing materials like ABS and ASA. Although the built in filter does a good job at keeping VOCs at safe levels, some filaments smell really really bad, which lead to the room I…
I designed these 5 components for the 5 gallon bucket I used as a water reservoir for my K40 laser. I wanted a way to get a good seal so the dust form other tools such as my CNC router do not contaminate the water. The holes for the water…
Enclosing two SLA AGM rechargeable lead acid batteries in a tight battery box for my solar power supply required protecting the exposed battery terminals to avoid the potentially dangerous condition of an accidental short circuit. The…
One of those snap cards that you might see someone in a movie crack open to get some instructions in case of X. Made to have a crisp crack for PLA. ( video with sound ) Fits roughly the thickness of a note card folded in half. Interior…
This purge chute is sealed to prevent pets from accessing filament purge. Use the two silver bolts and washers to secure the chute to the bolt holes on the back of the printer. There is a hole to allow for access to the bottom screw and…
See below for a video of how I used this for my son's birthday. The picture shows text I added, the STL model does NOT have text. The internal cavity is 90x125x1.5mm The top and bottom is 4mm thick, the walls are 3mm thick. You should be…
Do you keep your filament in vacuum sealed bags, but struggle to maintain a flat surface when using the pump when removing the air from the bag? This is a simple riser which is half as tall as a 1KG spool of filament, which you can place…
I wanted a waste filament collector that was small enough to fit within the printer footprint and also seal the waste filament port to reduce noise and air flow. It tucks perfectly behind the stock spool holder and does not obstruct…
EN ( FR plus bas ) Hermetically sealed jar for tea, sugar, coffee and more. 35, 50 and 75 cl jars with three different lids in four versions, a spoon and a TPU/TPE seal. The jars and lids in the photos are printed in 0.3 mm with a 0.4 mm…
I printed the upper surface with TPU to make it a bit soft for a better grip.
Replacement Battery Cover for: Surefeed Sealed Pet Bowl (Model: SPB) and Surefeed Microchip Pet Feeder (Model: MPF001) Designed to be printed on a FDM-Printer. (I will add more pictures ASAP)
Envelope sealed with a heart for the Lego wreath. Prints in 2 pieces, just glue them together. Print face down, no supports. ** This is a remix of a stud from the “Lego Wreath” by MagnumDanger, attributions bellow. This model is the same…
I had been storing my filament in plain old zip-lok bags with a small desiccant container in the centre of the spool for good measure. I recently decided to upgrade to vacuum bags, and using hygrometers to actually measure what the…
This is my answer to check all the boxes: Sealed buffer to keep PETG more dry Installed inside the original Prusa enclosure No need to do the hinged lid modification on the enclosure, because we intend to stack the printers in our…
A flask that could hold electronics to shake or glow, simulating a captured dragon inside.
Remix Details: Improved chamber seal, rear panel is now sandwiched between the cover and trim when tightened. Bowden entry threaded for a PC4-M10 fitting. Added a PG7 Key for easier tightening or removal of PG7 strain reliefs.…
This is a DIY Multi-Roll Dry-Box for keeping filament dry which features: PTFE external tubes for connecting directly to 3D printer Desiccant holders Hygrometer holder Perspex window Ability to enclose filament to reduce moisture content.…
Items needed for default model 2 - M6 PTFE connector 1 - 19mm OD 2.4 thick O-Ring 12 - 6x2mm disk magnets Feel free to modify the FreeCad file for your size of magnets and o-rings.
Awdemuth(thngvrse) made a really nice Aeropress travel cap that you can stuff a few spare filters inside, but I wanted one with a separate filter storage compartment- that will keep the filters clean and dry. My Aeropress comes with me on…
Heyho My friend asked me to create a container to store his already prepared dosing caps away properly. So I designed this solution for him:) It is possible to store 42 dosing container for the Storz & Bickel devices properly. Update…
This is a taller Version of my Sealed Container. I uploaded this as a remix since the main Design already has quite some files included and I don't want to confuse anyone :D Print instruction are the same as with the original one. I print…
Description: This is a custom-designed enclosure for the SW3518 module , available in two wall thickness options : 2mm for added durability and 1.6mm for faster printing and lighter applications. Key Features: Screwless, Sealed Design :…
At a point in time when I had misplaced the lid to my travel coffee mug, I designed this sealing replacement top. It prints in two pieces. One is the hard plastic lid. The other is the soft rubber seal. The best TPU for this is Ninjaflex.…
Sealed/waterproof case/holder for XT30 male Thread: М16х2 - 8mm Thread for fixing: М16х2 - 6mm For sealing needed O-rings 16-18mm x 1-2mm Recommended PET/PETG Сable AWG-16 In the photo (the safest for this sealed) You will need to grind…
A quick, complete redesign of a sealed waste / poop box for Qidi Plus4. This box is a bit larger than other similar slot-on models, sits further off the printer (helps with mainboard airflow), and is mostly air-sealed which helps keep the…
Printed ram which self centres in a bolt base of original Cynthia. Durable enough to live through 6 months of use. Needs two rings to seal and centre and one ring to seal the barrel. Print vertically and pay attention to sharp edges, they…
Remix of the Chewymountain design. Added 2x O-Ring 27x2.5
Allows you to measure the thickness of glass while the glass is in a frame. No supports needed but I recommend a colour change on the ruler to make it readable. You want the frame to be as stiff as possible so PLA or fibre filled if you…
Update 21Mar24 Additional desiccant cage lid with integrated molecular sieve symbol (needs filament colour change) Update 04Sep22 Improved desiccant cage. The new 3-part design is in a basket weave style, with screw on base & lid…
Prints in place with only supports for the bolt tabs (at least on my MK4s printer) I have test fit this in my car and it fits great, can't test it with a speaker for a few more weeks/months due to the car being restored Drivers door…
I have not tested these with speakers as my car is currently stripped for restoration, but test fits show these to fit perfectly Category: Automotive
With this pusher, you can now insert magazines without priming, and achieve 150 fps with mega darts using a K25 spring. Print with plenty of walls / 100% infill.
31/08/2025 - // Update - Added Different Gasket/ Seal(s) for those who need or prefer different ones. Part Dimensions: Lid + Bottom - 4.75 in. Tall, 3 in Diameter Bottom - 4.35 in. Tall, 3 in. Diameter Lid - 0.75 in. Tall, 3in. Diameter…
The tappet of the Surefeed Sealed Pet Bowl is a bit weak, becomes brittle over the time and breaks after a few years. This part can replace this tappet making the bowl working again. For better stability and to prevent the need of…
I built my own enclosure for my ender 3, but wanted a drybox extruder, I liked the price, availability and size of the sertilite 20l/q gasketed box. This system is meant to rest with the lid down on top of an enclosure or desktop I used…
Air Tag holder that won't allow it to fall out ever (provided you get a good print and use something durable like TPU). I wasn't able to find an air tag holder that I liked that I thought would actually keep the tag in place long term. Or…
Short Dart 16mm Barrel Collet Adapter Sealed and secured with o-rings ---> Nerf Rival Pilot O-ring sealed and secured, airtight 16mm aluminium barrel collet adapter ---> short dart mod ---> Nerf Rival Pilot. I wanted to convert my Pilot…
Print your sodastream bottlecap replacement. Use it with extra seal for tightness (find seal size information in images). Print instructions: - PLA or PETG tested - max layerhight 0.16 for smooth use - 100% infill - no supports needed
Full Image Catalog The complete gallery of my works can be found at www.marjers.com You can search by the file’s reference number or simply click the preview image to open it directly. Print setup Infill: 100% (solid) Layer height: 0.08…
This is my first ground up design. I used Autodesk Fusion. Nothing fancy. just functional. You will have to glue the base on at the angle of your choosing depending on where you plan to locate it in reference to your printer.
I need a wallet for my credit cards that snapped together & didn't let any dust or debris damage my cards. I made this about 5 years ago, printed it out of PTEG & it has been working really well, no card damage or dirt intrusion, so I…
Can be used to start growing basil and chili and other plants which need a lot of water at the start. When reloading a bottle make sure you are quick - it will be sealed quickly (a solution will be added soon - check out Update 1) Print…
Here is a compelling and technical description designed for platforms like Printables, Thingiverse, or MakerWorld. 📦 The "Unopenable" Mario Question Mark Block (Sealed + STEP File) Is it a prop? Is there something rattling inside? The…
Ice pop holder. Don't spill the melted ice pop on your hands or floor.
M4 screw set, comes in handy for other things too like the 4 retention screws for the headlight trim and they are used for the projector: https://www.amazon.com/dp/B0DCVVSGW2?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 M4 square nuts, my…
Fits on MINI beds. Internal support design for a safe and strong place to dispose of your used needles. One-way door. Clear, raised labeling helps prevent accidents. Don't push too hard or you will bend the door. Just slip the capped…
I designed this heart shaped box for the Valentine’s flash contest 2026 . The two halves can be sealed by inserting a lock bar. Once locked, the heart can no longer be opened without breaking it. Just like the famous love locks on bridges…
I typically get small bills for my little projects for people. So i figured I would stash them in a way i wont spend them till they stack up. Wasnt a existing file i liked, so i'll share mine. Made for Canadian bills. Printed standing…
This is the regular V-Core 3 rear motor mount with a sealing lip and minor adjustments. The sealing lip is on top of the bottom panel and therefore both seals and additionally underpins the motor mount. It is designed for a 3mm bottom…
This is a poop chute container upgrade for the Anycubic Kobra S1 . The containers are airtight and available in three sizes: Small, Medium, and Large . Thanks to the sealed lid , the container can also help improve the overall enclosure…
⚠ Step 0: Replace the Battery. Seriously. Before printing this case: Open your AirTag. Replace the CR2032 battery. Close it. Because once you seal it inside this case… there’s no going back. Battery dies = case dies. Simple as that.…
Printed at 0.2mm layer height and 15% Gyroid infill on a Flashforge AD5M. Sealed with paint (research how to paint 3D prints before painting). I printed with PLA, which isn't the greatest for UV exposure, so a couple layers of paint are…
Gridfinity compatible sealed container. Container/Lid: 0.2mm Layer height PLA/ABS/PETG O-Ring: 0.2mm Layer height TPU PETG/ABS recommend if you want to dry desicant in it.
This is a model from the game Crimson Desert. A sealed artifact from The Abyss. Which I recreated with the same engravings. I made two variants, one with smooth edges on all the engravings, the other is sharp (in the pictures it's the…
If you print with PETG this egg will seal whatever you contain it with, and is hard to break open with bare hands. Put four quarters inside or a bill and have them try to open with bare hands and if the do then they get the contents! i…
I've been looking to better seal the otherwise leaky Q2 for printing materials like ABS and ASA. Although the built in filter does a good job at keeping VOCs at safe levels, some filaments smell really really bad, which lead to the room I…
Design superseded by: Universal Single Filament Spool Dry Container Didn't like how the original fit in the container so I 3D modeled it for tight fit, -Added large desiccant storage holds ~1lb ( https ://amzn.to/3gPp7Uo ) -Bearing tubes…
Magnetic Sharpie mount with Sealed in magnets this print uses magnets that measure 12mm round by 2.8mm thick. dont forget to add in a pause print when slicing the file so that you can drop the magnets in the holes then continue printing…
Write your seed on a 1cm paper stripe. When print stops you can put it in. Continue print and the seed will get encapsulated. Printfile for PLA, 0,4mm Nozzle
This is a robust transport and storage container for tabletop minifigures. It is designed to be very sturdy but printed very fast with a minimum of filament. The container has a snap-fit cap which closes the container tight and protects…
Sealed Box with quarter turn lock. Lock can be mount with or without screw
In this sealed container you can store a seed phrase / recovery words for your krypto wallet. The predetermined breaking point at the top is meant to indicate whether the backup card is untouched or not. Also the container will help to…
This AirTag is a low-profile, very strong, and durable housing. There are a few key differences: 1.) All layers aligned for optimal printing and strength 2,) Sewing it into the collar with nylon thread prevents loss of AirTag during rough…
This is a larger rugged box with lid and a gasket thsat can be printed in TPU. This is the largest print I could make on my Ender at 210mm x 210mm. Hope you find it useful.
Print it and pause it just before it closes and put a gift card or money inside
These are all the parts I modeled to make my own dry box. Other Parts Required for Dry Box Mastercraft Sealed Bin Silica Gel Desiccant 1 ½ abs pipe PC4- M6 pneumatic fittings and PTFE tube
A ready-to-solve twisty puzzle box. Use this “Sealed top” version if you want to be able to swap out the mushroom top and avoid glue. https://youtu.be/qvjMhq8SCBg https://youtu.be/FJXxZtWEMqw Printer Requirements This is not a difficult…
A ready-to-solve twisty puzzle box. Use this “Open top” version if you want to seal a prize inside the puzzle without solving it first. https://youtu.be/qvjMhq8SCBg https://youtu.be/FJXxZtWEMqw Printer Requirements This is not a difficult…
I really liked jessed's pokemon deck box, but made a few changes (I'll let you decide if they're improvements). Things that are changed: There are slots in the lid and base for 1x10x20mm magnets to hold the box sealed Coin holder nubbins…
This 3D print model is a unique and functional gift idea, designed to put a letter or a banknote. The box is made of PLA material and the front of the box is designed with a lattice-like structure, allowing a glimpse of the inside…
I wanted a PTFE passthrough version of this model because it was adding too much friction on the filament. I'm running an MMU and added the RMU style buffer which added a lot more friction that I had before and started having errors. I…
This is a model of the sealed vault from Outer Wilds - Echoes of the Eye. It's obviously not an exact replica as I took some artistic licence to make it printable. Designed in Fusion 360, with some decoration added in Blender. Printing…
I did need a small container to kip my old blades, the idea was to be sealed and small :) BC version - is only the name that change. Print instructions Category: Containers Summary I did need a small container to kip my old blades, the…
I tried both the original and the remix (linked), but I wanted to keep the back cover closed, while being able to charge the PineTime too. This is the result. Supports are required and could use some improvement. I tried organic supports…
Replacement impeller for Anycubic Wash + Cure station (sealed to prevent rust). I had the ball bearing in my impeller for the Anycubic wash and cure station go bad and begin adding rust to all my prints. The alcohol I guess, made it rust…
This model was designed because I wanted to seal a key in a way that once the seal is broken it will be visible. With a printer this can easily be done in a small card shaped box like this one here. The Key will be inserted during the…
Designed as a quick single piece print to give a safe way to dispose of old blades. Printing Notes ----------------- To get the best result, print the model upside down (slot against build plate) to prevent drooping when bridging the gap.
This adaptor fits the header of a pump used for vacuum sealed bags which I bought on Amazon. There are two versions - the tubeless straight adaptor and the separate-but equal adaptors that are connected by a tube of diameter 5.2mm (OD).…
Edit 6-19-21: Added cylinder variant regular size. Edit 4-28-20: Added Xshot foam post variant. Don't use this with regular dart foam. Its too small. Accustrike style head for barrel blasters. Requires foam from other full length darts,…
After printing a couple other models that didn't seal properly, I decided to pick a well-designed model and make a few changes to seal it as much as possible. There are thee versions of the tray: The first version is meant to be printed…
Blue Series flanged Z motor cages for Rat Rig V-Core 3 (version 3) Please also see my Gold Series versions of these if you want an even more rigid rear motor mount or compatibility with a V-Core 3.1…
Remix of the backplate from TypQxQ's PTFE connector to add an o-ring to better seal the inside of the box. I really liked the PTFE through design of the original and how it held the tube firm in both directions, but the air leakage…
Print the Lid without supports, no extra build plate adhesion is required, a skirt or none will do. This model is to be printed with harder filaments, not FLEX due to the exact measurements for the PLA bend factor. FLEX will not grip the…
Ever want to save some money but you spend it as soon as you have it in your hot little hand? cram it inside this box. the only way to open it is to destroy the box. Save your money for your next big purchase. There are weak points in the…
Updated! The design was created in Onshape and can be found here . There are several parameters that can be adjusted: tube diameter tube length tube wall thickness O-ring position and diameter of the profile O-ring size Explore and adjust…
