1 / 7
Parametric tube with O-ring sealed lids
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple tube with O-ring sealed lids. Parameters, such as diameter, O-ring size and length can be adjusted.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 57
- Makes
- 0
- Views
- 403
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
Updated!
The design was created in Onshape and can be found here.
There are several parameters that can be adjusted:
- tube diameter
- tube length
- tube wall thickness
- O-ring position and diameter of the profile
- O-ring size
Explore and adjust the parameters to fit your O-ring size. The O-ring recess parameter defines how deep the O-ring will sit in the lid. Reduce/increase for a tighter/weaker seal.
Print the tube once and the lid twice. Obviously, you need two O-rings ;)
Edited: Simplified design. O-ring now sits on the outside of the tube.