Sealed Poop Chute
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fully covered poop chute for the X1C and P1S. This design is off of the ground and attached directly to the printer.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 1
- Views
- 227
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Standard Digital File License
This purge chute is sealed to prevent pets from accessing filament purge. Use the two silver bolts and washers to secure the chute to the bolt holes on the back of the printer. There is a hole to allow for access to the bottom screw and it is recommended to install this bolt first. The slim design allows for the printer to fit closer to a back wall and takes minimal space. Additionally, the purge bucket is accessible from the front of the printer.
The grate is printed separately to allow for easier support removal and less overhangs and can just be attached with superglue. The gaps in the grate allow for consistent airflow for the printer.
The bucket has built in tolerances and is a secure fit. The bin has alignment ridges to ensure a good fit.