1 / 7
Short Dart 16mm Barrel Collet Adapter _ O-Ring Sealed + Secured _ Nerf Rival Pilot — image 1
1 / 7

Short Dart 16mm Barrel Collet Adapter _ O-Ring Sealed + Secured _ Nerf Rival Pilot

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

O-ring sealed and secured, airtight 16mm barrel collet adapter ---> short dart mod ---> Nerf Rival Pilot

Rating
5 / 5
Likes
15
Downloads
36
Makes
3
Views
347
Reviews
3

Updated at source:

Model information

Category
Outdoor Toys
License
Creative Commons — Attribution — Noncommercial — Share Alike

Short Dart 16mm Barrel Collet Adapter 
Sealed and secured with o-rings ---> Nerf Rival Pilot


O-ring sealed and secured, airtight 16mm aluminium barrel collet adapter ---> short dart mod ---> Nerf Rival Pilot.

I wanted to convert my Pilot to short darts with an aluminum barrel, and I was looking for a way to integrate the aluminum barrel in an airtight, removable way, and without the need for glue or anything similar. I came up with this solution, which only requires a few O-rings for attachment and sealing and slides simply into the Rival barrel.

I have installed a unreasonable long 27 cm barrel here in the photos.
>>> I reccommend a 25 cm barrel for best performance.

Features:

Adapter and barrel is sealed and secured just with o-rings + collet. 

The same principle as the Silly SCAR (from there I also took the thread system and scaled it down).

Easy 100% dismantling if necessary.

No gluing of the aluminum barrel or something else necessary.

Cool SciFi-Style looking barrel shroud and muzzle.


You need 2 to 3 thin o-rings (thickness approx. 1 to 1,5mm) to secure and seal the alu barrel in the adapter. 2 to 3 I needed 3 so that the barrel was kept tight enough.

One o-ring (thickness approx. 2mm) is needed to fix and seal the adapter to the Rival barrel. If Make some silicone oil on this O-ring so that it can be plugged into the rival barrel a little easier.

You can see how to assemble it in the photos.

I have wrapped a stripe of 5mm crafting foam between alu barrel and muzzle of the blaster to stabilize this long aluminium barrel a little more.

  • 24.9.2025 Update:
    Added a cosmetic barrel shroud with “cooling holes” and a DL44 style Muzzle which are secured with a nut from the Silly SCAR.
    I've also included a file for a printed 200mm barrel (OD=16mm, ID=13mm) in case you don't have a suitable aluminum barrel available.

----------------------------------------------------------------------

The files are already pre-oriented.

It only needs approx 8g of filament.

My print settings for PLA:

0,2mm layer height
5 walls
20% gyroid infill
7 top and bottom shell layers
no supports needed
(print with outer brim if you have poor bed adhesion)

Thanks to Sillybutts and dysclarity for the files I could use for this remix.

Tags