1 / 1
20mm calibration cube
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use this to calibrate flow/multiplier for every filament you use.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 132
- Makes
- 1
- Views
- 284
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print the cube with 0.2mm layer height, 2 perimeters and extrusion width 0.4mm.
Measure all 4 walls, add up these and divide by 4. This is the measured wall thickness.
New flow rate = (0.8 / measured wall thickness) * Current flowrate