1 / 3
Mitsubishi (Lancer) drip molding cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Drip molding cover for a Mitsubishi Lancer.
- Rating
- 5 / 5
- Likes
- 48
- Downloads
- 553
- Makes
- 6
- Views
- 1,988
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
A friend of mine has a Mitsubishi Lancer and he had these covers stolen/broken. And of course, ordering online would have been way too expensive. Fortunately he had one left that was partially broken, but I managed to take measurements and reconstruct it in Blender.
With some sanding with 600-grit or 1000-grit wet sandpaper, and some spray-paint, they turn out awesome.
Print suggestions:
- Suggested Material: ABS, ASA or PETG, since it's gonna be directly exposed to the elements.
- Nozzle: 0.4mm (can't go with bigger cause details for the latches are needed)
- Parameters/infill: at least 3 params, with at least 15%. You could go higher or print 100% infill for a more sturdy print
- Layer height: 0.16mm or 0.2mm work fine
- Supports: The auto-generated ones from PrusaSlicer work just fine.
I tried printing it in a few orientations but printing it on it's side as a base with supports yielded best results in visual quality.