1 / 3
Mitsubishi (Lancer) drip molding cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drip molding cover for a Mitsubishi Lancer.
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 546
- Wydruki
- 6
- Wyświetlenia
- 1970
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 6) (Komentarze: 12)Remiksy (0)Kolekcje (50)Powiązane
A friend of mine has a Mitsubishi Lancer and he had these covers stolen/broken. And of course, ordering online would have been way too expensive. Fortunately he had one left that was partially broken, but I managed to take measurements and reconstruct it in Blender.
With some sanding with 600-grit or 1000-grit wet sandpaper, and some spray-paint, they turn out awesome.
Print suggestions:
- Suggested Material: ABS, ASA or PETG, since it's gonna be directly exposed to the elements.
- Nozzle: 0.4mm (can't go with bigger cause details for the latches are needed)
- Parameters/infill: at least 3 params, with at least 15%. You could go higher or print 100% infill for a more sturdy print
- Layer height: 0.16mm or 0.2mm work fine
- Supports: The auto-generated ones from PrusaSlicer work just fine.
I tried printing it in a few orientations but printing it on it's side as a base with supports yielded best results in visual quality.