minimal speed square holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Speed square wall mount with minimal printing effort. If you own a speed square, chances are you have some pieces of…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 102
- Makes
- 0
- Views
- 624
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Speed square wall mount with minimal printing effort.
If you own a speed square, chances are you have some pieces of scrap wood with at least one straight edge lying around, too.
This small triangular ledge allows for simple wall mounted storage of a small (cheap) speed square of the eBay or Amazon variety without wasting a lot of filament.
You only need a fairly straight piece of wood (slightly wider and preferably as long as your speed square) to put the wide edge of the square on top and two 3mm woodscrews to fix this triangular print accordingly (done in <30 minutes even with a slow/old printer).
OpenSCAD is not my forte, so please don't mind the very simple scripting.
Print Settings
Printer Brand:
Sovol
Printer:
SV02
Rafts:
No
Supports:
No
Resolution:
0.28
Infill:
15%
Filament: generic PLA doesn't matter
Notes:
it's a Sovol SV06, but you can't choose that in the options (only SV02,SV04 and SV07) ...
... and the .scad file is not (yet) showing up in the thing files ...Category: Hand Tools