1 / 13
Fanatec CSL Pedale (Shaker Upgrade) Alle Pedale nun Kompatibel — image 1
1 / 13

Fanatec CSL Pedale (Shaker Upgrade) Alle Pedale nun Kompatibel

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Update 16.02.2024 Nun passend zu allen Pedalplatten!

Rating
0 / 5
Likes
14
Downloads
120
Makes
0
Views
1,519
Reviews
0

Updated at source:

Model information

Category
Video Games
License
Creative Commons — Attribution — Noncommercial

Die beiden Teile sind sehr einfach zu Drucken und passen Perfekt. Optimal ist es wenn man auch die Pedale mit ausdruckt. Für die Pedale braucht man aber noch M4 Einschmelzgewinde!!! 

Gedruckt habe ich das ganze mit 4 Außenlinien und 15% Füllung @Sunlu PETG

Diese Sachen habe ich bei Amazon dafür gekauft:

Shaker: FTVOGUE Resonanz-Lautsprecher 4Ohm 25w

https://www.amazon.de/gp/product/B07N664XZF/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&th=1

Verstärker: Nobsound NS-10G Mini

https://www.amazon.de/gp/product/B0716C2FFY/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

Kabel 4x0,34mm²

https://www.amazon.de/gp/product/B0973BSHM3/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&th=1

NEU: Habe nun auch andere Shaker halter konstruiert die dann über die Pedale von Vorne verschraubt werden! So kann man das Fanatec CSL Pedale Tuning Kit nutzen! Da gibt es zwei varianten

  1. Halter für M4 Einschmelzgewinde
  2. Halter wo man selber das Gewinde Reinschneiden muss

Wer den NobSound Verstärker an seinem Alurig anbauen will kann auch meinen Halter dafür ausdrucken so das man die Kabel quasi unsichtbar verlegen kann. Für das Netzteil habe ich auch zwei Klips gezeichnet damit man das NT am Aluprofil anstecken kann

 

Die Shaker werden dann mit SimHub angesteuert und haben ordentlich Power so das man schon sehr stark spürt ob die Tractionskontrolle oder das ABS anspringt. Wichtig ist nur das man den Nobsound nicht mehr als 50% aufdreht weil die Shaker nur 25Watt haben und der Nobsound 50Watt pro Kanal. Für den stärksten Effekt sollte man im SimHub auch 60Hz nutzen weil dann vibriert das sehr Stark

Wenn ihr das gedruckt habt dann würde ich mich über eine Bewertung und ein Make freuen 

 

English:

The two parts are very easy to print and fit perfectly. It is ideal if you also print out the pedals. But for the pedals you still need M4 melt thread!!!

I printed the whole thing with 4 outer lines and 15% filling @Sunlu PETG

I bought these things on Amazon for it:

Shaker: FTVOGUE resonance speaker 4Ohm 25w

https://www.amazon.de/gp/product/B07N664XZF/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&th=1

Amplifier: Nobsound NS-10G Mini

https://www.amazon.de/gp/product/B0716C2FFY/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

Cable 4x0.34mm²

https://www.amazon.de/gp/product/B0973BSHM3/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&th=1

 

NEW: I have now designed other shaker holders that are then screwed onto the pedals from the front! This is how you can use the Fanatec CSL pedal tuning kit! There are two variants

  1. Holder for M4 melting thread
  2. Holder where you have to cut the thread yourself

If you want to install the NobSound amplifier on your Alurig, you can also print out my holder for it so that you can lay the cables virtually invisibly. I also drew two clips for the power supply so that you can attach the NT to the aluminum profile

 

The shakers are then controlled with SimHub and have a lot of power so that you can clearly feel whether the traction control or the ABS is starting. The only important thing is that you don't turn up the Nobsound more than 50% because the shakers only have 25 watts and the Nobsound has 50 watts per channel. For the strongest effect you should also use 60Hz in the SimHub because then it vibrates very strongly

If you have printed the part then I would be happy about a rating and a make in the comments.

Tags