Ikea Förnuftig air purifier fume exhaust
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Exhaust adaptor for the Ikea Förnuftig air purifier for outdoor ventilation
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 79
- Makes
- 0
- Views
- 1,077
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial
Simple approach to connect the Förnuftig to a 100 mm hose (you won't need a clamp). Just put it with some superglue on the corners in place (good adhesive tape might work aswell). You might want to use the air purifier without the filters.
Förnuftig uses a radial blower with a good static pressure so it is capable of pushing everything out of the room (setting 2 and 3). It get's a bit noisier due to the missing HEPA filter.
I don't recommend printing in vase mode because of the rather steep angles. If you like to do so, please use at least a 0.6 nozzle with a line width of 0.8!
Print with 0 top and bottom layers and 3 wall lines. 10 mm of brim recommended (it will fit a Bambu printer). Don't go too fast (I reprinted at max. 150 mm/s).
Added a simple wall mount bracket for a hose or pipe (100 mm).