Ikea Förnuftig air purifier fume exhaust
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Exhaust adaptor for the Ikea Förnuftig air purifier for outdoor ventilation
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 1077
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple approach to connect the Förnuftig to a 100 mm hose (you won't need a clamp). Just put it with some superglue on the corners in place (good adhesive tape might work aswell). You might want to use the air purifier without the filters.
Förnuftig uses a radial blower with a good static pressure so it is capable of pushing everything out of the room (setting 2 and 3). It get's a bit noisier due to the missing HEPA filter.
I don't recommend printing in vase mode because of the rather steep angles. If you like to do so, please use at least a 0.6 nozzle with a line width of 0.8!
Print with 0 top and bottom layers and 3 wall lines. 10 mm of brim recommended (it will fit a Bambu printer). Don't go too fast (I reprinted at max. 150 mm/s).
Added a simple wall mount bracket for a hose or pipe (100 mm).