Blue Wonder Brushless Motor Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.29 – €0.35 net (excluding VAT)
For file: Blue Wonder 90 degree Mount_0.4n_0.2mm_PLA_MK4IS_19m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.32 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 19.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A 90-degree mount for the hexTronik 24g brushless outrunner motor. Fits a motor with a 0.835" bolt circle (21.2 mm).
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 73
- Makes
- 0
- Views
- 294
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Intended to be used for something like a prop-in-slot model using the Hextronik 24g brushless motor. I did not use supports when printing and all turned out well.
The included gcode is for PLA on a Prusa i3 Mk4 with Input Shaper (I used firmware version 5.0.0)