Pipe mount adaptor for 6W meshtastic station.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this is an adaptor to use instead of the special metal bracket.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 68
- Makes
- 0
- Views
- 454
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
replace the metal plate and hardware the original designer was intended to use.
by printing this adapter plate you can directly mount the assembly onto a 1inch~ pipe.
WARNING:
1-made for 1inch~ (maximum 30mm) pipe
2-you need to drill 2hole thru the pipe
3-fastened with 2bolts+nuts
Picture will be added in the future. mine is already printed, but i am waiting for a single missing part for this project. PRINT FLAT SIDE DOWN! not as pictured.
i want to thank the original designer of this weather station. thank you for having sharing this clever creation with us!