Pipe mount adaptor for 6W meshtastic station.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is an adaptor to use instead of the special metal bracket.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 454
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
replace the metal plate and hardware the original designer was intended to use.
by printing this adapter plate you can directly mount the assembly onto a 1inch~ pipe.
WARNING:
1-made for 1inch~ (maximum 30mm) pipe
2-you need to drill 2hole thru the pipe
3-fastened with 2bolts+nuts
Picture will be added in the future. mine is already printed, but i am waiting for a single missing part for this project. PRINT FLAT SIDE DOWN! not as pictured.
i want to thank the original designer of this weather station. thank you for having sharing this clever creation with us!