1 / 5
Door Wedge for MMU RMU Mk3 Single Filament Bypass — image 1
1 / 5

Door Wedge for MMU RMU Mk3 Single Filament Bypass

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This model allows the top door on the RMU Mk3 to be propped open to allow a direct feed to the MMU bypassing the buffer

Rating
0 / 5
Likes
5
Downloads
21
Makes
0
Views
435
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This model allows the top door on the RMU Mk3 to be propped open to allow a direct filament feed to the MMU bypassing the buffer when you are only printing single colour and don't need the buffer functionality.

There are 2 versions to suit both the side and top feed variants of the RMU Mk3 (the holes to MMU in the top door are positioned differently where the wedge slots in). For both types you would likely need the filament roll located below the RMU.

I used PETG but PLA should be OK for this application. I also used organic supports, if you want you could do a layer colour change to the highlight the embossed letter with a different orientation placement when you slice.

I may also try to use this wedge when I am loading the buffer and the MMU for a multicolour print, but it probably needs modification to open the door more and may not work when more than 3 colours are used.

hope it is of use to you.

Tags