FLSUN SR Extruder mount OMG V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
In my book this is the way the extruder shut be mounted to give a straight line to extruder.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 83
- Makes
- 4
- Views
- 603
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This model will give you a straight filament path to extruder.
don't believe everything you see on youtube , Igor must have seen it but failed to mention it somehow 🤔, even if its fliped 180 degree its not in a straigt line but better and then you will need wires to be fliped in connector for correct motion.
You will need some longer screws and a couble of M3 heat inserts , but if you is a tinker you will have the parts on hand for sure.
Chose some stiff material PETG with carbon or alike.
Another benefit of this mount is reduce of the resonans from the motor to the topframe
E steps for me was perfect at 370 here is the G code for that:
M92 E370
M500
Hope this model is of use to you , enjoy.