1 / 2
Controller Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket to mount the controller on my Spark 3D SP1 at 90 degree to Machine.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 97
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Bracket to mount the controller on my Spark 3D SP1 at 90 degree to Machine. this is more suited to my desk setup as I have my printer sideways.
No extra bolts needed. use the existing M5 bolts. the smaller holes are 4.5mm. either tap at M5 of slowly wind Bolts in to cut threads. I've undone and recrewed these a few time and not striped any threads.
printed at 0.2mm layer, 0.8mm wall thickness and 15% infill Cubic
Print Settings
Printer:
Spark 3D SP1
Rafts:
No
Supports:
No
Resolution:
0.8mm
Infill:
15%
Filament:
Any
Category: 3D Printers