Counting matching models…
This is a case I made for the ESP12F 4x relay board, like this one: https://www.banggood.com/AC-or-DC-Power-Supply-ESP8266-WIFI-Four-way-Relay-Module-ESP-12F-Development-Board-Secondary-Development-p-1794113.html It is designed to just…
Tired of breaking my thumbnail when loading Hi-Capa mags, so I made this... I saw a few others on here, but was unsure if they would work on the Novritsch SSP1 mags so I just drew up my own. It will load 29 bbs (31 is max, but the spring…
Have a good time printing it... Cheers! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: NA Filament: NA NA Category: Automotive
Redesigned version of glock carbine kit, that i made for my ssp18, lightweight and compact. I printed it with Pla+ and 6 internal walls, main body need support. Airsoft use only !!!
A low profile top rail for the Novritch SSP1. A M3-35mm Phillips or Allankey bold and a M3 Nut is used to fix the botom rail in place. (It schuld hold on ti's own) Print Settings Layer Height = 0,2mm Infill = 50% (it will work with less,…
This is a remix from some Glock magwell and made it fit to SSP18. This SSP18 magwell has lanyard hole. I used M4 x 15
Pistol stand for Novritsch SSP1, M1911A1, and HK USP45 ________________________________________________________________________________________________________ If you want, you can buy me a beer :)…
Case / Enclosure for an ESP8266 / NodeMCU / ESP12-F Key Features: Accessible USB Port Prints without supports space for 3-5 wires no screws required, just click it together I'm using it for WLED Projects.
Tested and working, .327 caliber speed loader for the Ruger SP101. Material: PLA Requires super glue inside hex cap for the final assembly. Updated design, as of 6-22-25 No supports needed, easy assembly. STEP file included for mods. A…
About The SP1 Eurorack Modular Case Why to be limited to modules when it comes to a flexible modular system? Why not also to be flexible with the casing? The SP1 growths with your needs. From the small to-go modular drum synthesiser setup…
I resized and adjusted the great model from @dewgenenny. It fits the 8x Relay board now, what I changed apart from the size was: replaced the guides to fit M3 screws and nuts (the nuts I fixed with superglue in place) Changed the holes to…
Case for SDRplay RSP1 Chinese clone SDR RSP1 clone description This radios receiver adopts MSI2500 MSI001 scheme, simplified RSP1 circuit, the interface is USB Type-C interface. Effective frequency ranges from 10KHz to 2GHz, 12bit ADC…
SSP18 mock suppressor Shoutout to “H6K2LH” for the idea. I need to mention that this is not a repost, I did make these on my own, so please, don't call me a copier. I made this model because I wanted a super cool looking mock suppressor…
I made the following changes: Relocated the holes for the SMA connectors to align with the board. Aligned the screw holes for the SMA Header with the case. Aligned the screw holes for the cover with the case. Added a slot to mount the…
Handguard for the Novritsch SSP18 featuring M-LOK slots and a full-length Picatinny top rail. Uses M3*30 Screws and M3 Nuts. Includes Inlay for the Picatinny rails to reduce wobble 3D printed in PLA with 0.2 mm layer height, 0.4 mm line…
Print Settings: Printer: Flsun SR + Flsun Speeder Pad (klipper) Supports: No Resulution: 0.2mm Infill: 15 Filament: Gembird PLA Print Time: 1h 09m
Fork Spring Spacer Washer 35.5/26mm th10mm Honda Transalp 600/650 Rondella Distanziale Molla Forcelle 35.5_26 sp10mm Transalp Filaments recommended: Nylon PA12 ASA PPS-CF PPA-CF PA6-CF PAHT-CF PA6-GF or filaments with a excellent…
Flashadapter fuer Gosund_SP111 oder baugleiche WiFi Steckdosen. Category: Household
a thread protector for the novritsch SSP18 or any gun with 14mm CCW threads.
Route your PicoBoot connections to the Serial Port 1 bay, and mount your Pico to this adapter to plug into the Serial Port 1. Easy access and no tape/glue required. Uses 4 M2*6 screws and M2 nuts (M2.5 should work as well). I printed this…
This is a simple Case for the 4channel relay boards with a esp8266/esp32: Models: https://templates.blakadder.com/ESP12F_Relay_X4.html / https://devices.esphome.io/devices/ESP-12F-Relay-X4…
Material Frame parts ABS, ASA, or PETG Armor parts Any Layer height First layer 0.2 mm Other layers 0.15 mm Number of perimeters 2 Infill 20%, rectilinear First layer speed 25% of default Elephant foot compensation 0.15 mm Supports None…
The breadboards are sized 165x56mm and 84x55mm. The dc/dc converter is this one: http://www.amazon.de/gp/product/B07XJWSWKT Breakout boards are these:…
simple case for ESP12F board with relay.... Print Settings Printer Brand: Prusa Printer: I3 MK3S Category: Electronics
2x3 divider for Konger SP16 organizer/cabinet drawers Print instructions Inner drawer dimensions: 50x35x67mm Where to buy: https://szufladki.com https://www.tme.eu/sk/en/details/szuflpl16/drawers-and-sets/konger/p16/…
50.8mm standard Eurorack Module with a horizontal pitch of 10 HP (1 HP=5.08 mm). The module can be combined by assembling the modules with threaded strips. Free STL file downloads for other modules available under…
A few months ago I damaged one of my PCBite SP200 probes. So i had to repair them. When i saw today those protective sleeve i thought lets print one of those. Unfortunately it didn't fit the SP200. So I designed a new one i started from…
This is a slimmer case design for the SDRplay RSP1A. The original case is rather bulky for the design. This case also relocates the antenna to the same side of the case as the USB port for easier mounting. Uses the factory included…
Not much to say - I have a Ricoh SP150 laser printer, and a tiny gear in the toner cartridge broke which is used to drive the rollers inside. This is a replacement - but note that this is subjected to some pretty intense forces by the…
Seitz Window Blind Flyscreen Retaining Clip SP1044 Caravan. Fix your caravan or motorhome blinds quickly and affordably! This 3D printed clip replaces the often-broken Seitz/Dometic part (SP104409/SP1044) and restores smooth blind…
The gaping hole in the side of the ESC freaked me out while carrying SP140 on the back of the car down dusty roads, so I created this dust cover. It also stabilizes the flimsy throttle plugs. It's press fit between the mounting bolts of…
A charging handle for the SSP1 which replaces the original front sight. The part is being hold in place by printing it slightly bigger (Incase the part doesn't fit, try to scale it slightly) and press fitting it into the mount. The model…
i created a extended baseplate for the standard Novritsch SSP18 mag. I dont wanna spent a lot of money for a cool looking magazine extension so i made two. One is a bit edgy and the other is a bit orientated on the Novritsch Maxwell…
You can buy one of these diffusers from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! No supports required! This is a flashlight diffuser that distributes the light radially and downward to…
A sight mount with picatinny rail, that fits to the Novritsch ssp18 airsoft pistol. Material: PLA Nozzle (what I used, works well with others):0,6mm You don't need any other parts than the screw, that holds the stock sight in place. I put…
Replacement for the wheels that hold the rail for the middle basket. I printed them in ASA so they can handle the temperatures in the dischwascher.
A 2x2 gridfinity holder that holds 4 Pcbite SP10 probes. Press-fit Magnets.
The original ESP-12E pogo pin programmer by GregFrost works very well. I added a small base for it as attached files. Fusion 360 file is included as well as the stl. If you need a STEP file let me know. Hope this helps someone.
if you loose your mags baseplate, here you go.
Solder pen with Base station. can be used to carry around when on site or wihth base station as tabletop solder station. features: 0.8-2mm solder level indicator stand winding tool I designed this to fit: 0,8-1mm solder with the 1.0…
A holder for your SSP18 mags that goes on your belt infil: 50% printer: MK3.5 filament: prusament grey
The Typhoon Compensator is a custom muzzle device designed specifically for the Novritsch SSP18 (and other airsoft pistols with 14mm CCW threads). Since this is a functional part that may take impacts, I recommend the following settings…
Replacement palm rests for the 3dconnexion sp1usb spacepilot, a plain and two different textured ones.
A 3x1x6 Units Gridfinity Base for Noga SP1010 Deburring Set Holes are already with offset. If your printer tolerances are out of way and the pins don't fit, a 3.5mm (ideally 3.4mm) drill bit should do the job.
A rough 3D model I made with my calipers so that I could mount just the circuit board inside a dodecahedron infinity mirror design. This doesn't include all surface mounted chips, just the tallest ones for clearance purposes. Don't forget…
Filament guide for Voxelab Aquila X2/Spark 3D SP1, to be able to connect PTFE pipe from drier box. Print Settings Printer: Voxelab Aquila X2/Spark 3D SP1 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Filament: Any PLA Any Notes: I…
Have you any question? Please watch my video.
Vacuum skimmer plate Hayward SP1094D Plateau d'aspiration piscine Hayward SP1094D Print in ASA, 45 degrees Imprimé en ASA, à 45 degrées Printed on a Qidi Q2 65c heated chamber with : 4 walls, 15% infill, 0.24mm layer height
This is a replacement part for Corsair 120 mm fans SP120 and AF 120 (The ones I have were bought in 2013, I don't know if they kept the same design). These fans come with a rubber grommet that deteriorates over time, either because the…
Я шукав повністю готову модель для проекту, але не знайшов, тому вибрав найкращу і мод
DIN-Rail-Housing for ESP12F RELAY 2X This is a housing for the popular ESP12F Relay 2x. It is intended for attachment to DIN-Rails but since the rail-clips are printed separately it can be used stand alone as well. Additional parts part…
Dust connection for a 100mm hose in stead of the tiny 35mm thing that comes withj the saw Category: Parts
The RSP1A covers the complete radio spectrum from 1kHz (VLF) to 2GHz (Microwaves) with up to a massive 10MHz visible bandwidth and the companion SDR software has all the popular ham bands and shortwave broadcast bands as “presets” for…
I liked the general design of Rhazgular's Flashtool from Thingiverse but did not intend to integrate a complete FTDI assembly into it and use a pin header instead. So I decided the original design was a bit too much for me and cut down…
i dropped my magazine in a game and my baseplate went one way and my mag spring went the other, i managed to retrieve both of them, however i could not find the baseplate button, so i quickly designed a new one, its basically a 1:1 copy…
Ring with square mandala grill for Corsair SP120 Fan Improved diameter size Category: Computer
Remix of lucas_sp12 's Samsung S24 TPU Case With Text Don't Panic Written In Large friendly Letters On It's Back I added fillets to the edge of the case and a strip over the side buttons and supports, which need to be clipped off before…
Base for the Sofirn SP10 to make it more stable when standing on the tail. (Requires the lanyard holes to be unused.)
Made for receipt printer Star TSP100. I lost my wall holder so i created this one.
This is a minimalistic adapter thing to flash those sp111 with little effort. I mean yes I had to soldered a bit at the pogo pins but this was much simpler than trying to get the PCB out or solder in the housing. An advantage here is that…
Just a spacer to get the original further out to fit with other Grips like Dominos in my case.
Global tomographic models of seismic velocity provide us with crucial information about the planet’s interior. Here, we represent S wave velocity variation such that slow velocities stand proud and fast velocities as depressions. To…
Just a simple, easy, fast printing light diffuser for the SP10Pro. Friction fit on the head as per my light. Easy to scale up/down a little for clearances. I've included 2 files, one straight off the diameter of the light plus 1.6mm for…
Replacement locking hook suitable for ASP 12-ES, ASP 15-ES, ASP20-ES, ASP30-ES, NTS30S and other Scheppach vacuum cleaners . The pictures show a comparison of the original hook and a test print with PrusaSlicer 0.3mm DRAFT PLA. So far…
I designed this to work with .75" wide elastic strap.
I wanted to build a programmable mechanical keyboard without an unfamiliar layout requiring me to re-learn how to type all over again. There are a few commercial options that almost fit the bill, but the only fully-programmable one isn't…
This is an ammo box for 9mm rounds loaded in moon clips for the Ruger SP101. The STL files include the box and two lid versions. One with writing, one plain so you can use as is or customize. I will make alterations on request. The fourth…
Wall mount for Star TSP100 series.
An improved lens cap for the Intova SP1 underwater camera (I think successor cameras like the Intova Sport HD, Intova Sport Pro, Intova Nova, ... all used the same housing, so this cap should fit them as well). It has the following…
Case for the Wondom 500W Boost Converter
Seat saver key for the SP 108/109/156. Designed in 2 parts for ease of printing. Insert the key through the center of the "S" disc on the regulator and turn 90 degrees to lock in place. keeps the lever depressed without deforming the…
Ring with simple grill for Corsair SP120 Fan Category: Computer
Service Pack 1 for the Corally Python Version 1 includes a new Wing Holder but not a Spacer (like in the Python Version 2). There is a gap between the holder and the screw which doesn't look good. So I made one and printed in red to match…
SFX PSU Mount LIAN LI SP1000P, made to mount the PSU under my desk.
This bookmark is for a group of friend I met at G&G.
Meinem Nachbarn bricht regelmäßig der Griff von seinem Heki-Rollo im Wohnwagen ab. Das Teil gibt es wohl kaum irgendwo zu kaufen und wenn, dann nur für recht viel Geld in einem Teileset, von dem man nur den Griff braucht. Ich habe schnell…
MAC Allister MMSP1500WS protective hand pedal. Print Settings Printer Brand: Bambu Lab Printer: Bambu X1C Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20 Category: Other
The design uses a threaded insert to allow more repeated use. An M4x0.7 insert is needed, maximum length is 8.5mm with a diameter of 5.5-5.6mm. It has a tapered hole and a split to allow different sized probes to fit, with the ideal…
Reduces the contact angle between the stock and your body while increasing the contact area for improved stability. Includes an optional sling attachment point. This screws in from the opposite side, requiring shorter screws on both sides…
Made this piece of SSP18 outer barrel because i destroyed 14ccw thread and i needed fast repair kit in this matter. Two versions of CW M12x1 threads compensation 0.15, 0,20. Printed with PCTG 0,4 nozzle, 0,15.
Suddenly my battery lid on the inside of my kitchen trash can disappeared (obviously, it somehow dropped into the trash, unnoticed, and has now gone to somewhere else...) Here is a replacement battery cover lid for the iTouchless SP13…
Handguard for the Novritsch SSP18 featuring M-LOK slots and a full-length Picatinny top rail. Uses M3*30 Screws and M3 Nuts. Includes Inlay for the Picatinny rails to reduce wobble 3D printed in PLA with 0.2 mm layer height, 0.4 mm line…
Vacuum skimmer plate Hayward SP1094D Plateau d'aspiration piscine Hayward SP1094D Print in ASA, 45 degrees Imprimé en ASA, à 45 degrées Printed on a Qidi Q2 65c heated chamber with : 4 walls, 15% infill, 0.24mm layer height
This is a combined remix of two items: https://www.thingiverse.com/thing:2769305 - knife handle (modified for 0.19" blade) https://www.thingiverse.com/thing:2804229 - knife blade (removed teeth, blade thickness fixed to 0.19", added blood…
made in tinkercad and printed on a Bambu lab A1 mini print settings PETG 30% gyroid infill Feel free to comment if you have any comments or questions! Fits on a hub size of 60.1 mm and a wheel with a center bore of 79.5 mm
Simple box for ESP12F_Relay_30A X4_V1.1 Can be screwed directly to a wall across the circuit board with longer screws too.Printed in PETG no supports needed
These IP68 waterproof SP16 cable connector plug & socket sets usually come with a cap for the socket, but no cap for the plug. Whenever I unplug my things, I want to protect the pins in the plug, so I decided to design a cap. The cap has…
This part was made to replace the original broken part from a DW 5000 double bass drum pedal. With a good printer configuration it will be strong enough to be used for a long time.
Wall mount with two of 4mm and 3mm countersunk holes each. Four tension clips for easy attachment/removal of the SDR
The case was designed to be simple and a one-piece design. Other cases were for other numbers of inputs/other versions of the design, or in the case of the one project that did exist for the 6 input version, a two-piece design. This…
PSU Mount and Case for the RSP150-12 by Meanwell. Mounts designed for 8040 extrusion. Personally, I used this for a SimHub Wind Sim PowerSupply mounted to my SimRig. The grommet holes are 1 x 16.5mm and 2x13mm diameter. The two main…
A box to wall mount a SP13-3F Connector. Hole with M12 thread for a grommet for the cable entry. Small 1mm hole for air pressure equilibration to prevent moisture. Printed in PETG.
