1 / 5
Garmin twist lock spacer - 20mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
20mm spacer for garmin twist lock mounts.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 37
- Makes
- 0
- Views
- 540
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
20mm spacer for garmin twist lock mounts.
I made this to allow me to mount my Garmin Varia radar properly on my bike, using the original plate as the mating surface so no loss in durability. You will need a pair of 25mm M3 socket head cap screws to reach the threaded inserts through the print. I'd also recommend threadlocker on the new screws since the original screws come with it and a bike is a high vibration environment.
Tested using ASA filament, 5 perimeters, and 40% infill, though should be fine using less infill.