1 / 3
Depth stop for multi tool - depth 5mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To remove joints between tiles, I have designed this depth stop for a BOSCH multi tool.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 29
- Makes
- 0
- Views
- 262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Part is printed with PETG and do not need supports.
For the cutting disc which is shown on the picture, the depth is limited to 5mm.
Assembly instruction:
- Add hexagon nuts M3 (2x) to clamp plate 1.
- Add hexagon nuts M3 (2x) and M4 (2x) to the clamp plate 2.
- Assemble clamp plate 1 and clamp plate 2 by using cylinder screws M4x20 (2x) to the multi tool.
- Assemble the ring to the clamp plates by using countersunk screws M3x8 (4x).