1 / 2
DnD 3 digit HP counter combined number dial with flush numbers — image 1
1 / 2

DnD 3 digit HP counter combined number dial with flush numbers

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

wanted the numbers to look a bit cleaner on the dials and combined the dial backs as well.

Rating
0 / 5
Likes
17
Downloads
92
Makes
0
Views
1,710
Reviews
0

Updated at source:

Model information

Category
Board Games
License
Creative Commons — Attribution — Share Alike

I liked these hp counters but the numbers looked a little rough so used a similar technique i used on my flash tiles, example photos were printed at 80% and I skipped the 3rd filament change to save on the gold filament but I would recommend doing the 3rd change to avoid gap issue. Also 100% size will likely give better finish I just like the smaller size.

 

Example photos were printed on mk3s+ without a mmu. Just a little patience doing manual filament changes.

The file provided has separate parts for each number if you're used to multi material printing with a mmu do the usual. 

 

This file just replaces the num_bot and num_top from the original.

Slicer settings

for printers without a mmu or equivalent 

0.2 layer height 

set number of extruders to 2 

add the g code m600 to the custom g code section for tool changes

add a wipe tower in a free corner for best results

if using wipe tower enable “No sparse layers” to avoid filament waste