Weather-witch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wind vane with a picture of a witch (replaceable)
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 135
- Makes
- 1
- Views
- 632
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Can be assembled without the use of glue
In addition to the 3D printed parts that must be used:
- 2 x M4x35mm, nut and washer.
- 1 x Ø2 mm bicycle spokes in stainless steel (> 11cm). It may well be an old cracked spoke, as only the threaded end must be used.
- 1 pearl etc. to reduce the friction between pointer and top
- 1 x Ø16mm rod or pipe in suitable length
- 1 zip tie
- Around 20cm 1,5mm2 massive copper wire, etc. to hold the parts together.
To reduce the friction between pointer and top, a pearl or other is inserted
A bicycle spoke is used as the vertical axis. The axis must be approx. 85 mm, plus height of the pearl. The axle/spoke is bent 90° to the horizontal. The horizontal pieces must be approx. 20 mm to fit in to the Branch A
Wind vane with a picture of a witch is fixed with a zip tie. By not gluing it, it can be changed to another image
The other parts are attached with solid electric wire, steel wire, nails etc.
