Weather-witch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wind vane with a picture of a witch (replaceable)
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 135
- Wydruki
- 1
- Wyświetlenia
- 632
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Can be assembled without the use of glue
In addition to the 3D printed parts that must be used:
- 2 x M4x35mm, nut and washer.
- 1 x Ø2 mm bicycle spokes in stainless steel (> 11cm). It may well be an old cracked spoke, as only the threaded end must be used.
- 1 pearl etc. to reduce the friction between pointer and top
- 1 x Ø16mm rod or pipe in suitable length
- 1 zip tie
- Around 20cm 1,5mm2 massive copper wire, etc. to hold the parts together.
To reduce the friction between pointer and top, a pearl or other is inserted
A bicycle spoke is used as the vertical axis. The axis must be approx. 85 mm, plus height of the pearl. The axle/spoke is bent 90° to the horizontal. The horizontal pieces must be approx. 20 mm to fit in to the Branch A
Wind vane with a picture of a witch is fixed with a zip tie. By not gluing it, it can be changed to another image
The other parts are attached with solid electric wire, steel wire, nails etc.
