1 / 7
Flat Mesh Skirt - Voron 2.4 Center Logo mod using LED-strips
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple mod to use LED-strips instead of Neopixel-PCB LEDs.
- Rating
- 5 / 5
- Likes
- 58
- Downloads
- 90
- Makes
- 1
- Views
- 1,699
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
This is a stupid mod. Buy the correct PCB-LED's per jiral's original spec. But if you don't want to or happen to have 60Leds per meter LED-strips at home already and want to suffer the pain of soldering, here is the mod for you!
- Print the parts.
- Cut 4 pieces of LED-strip
- 2x single sections (for the short parts of the logo)
- 1x 2-LED long piece (for the long part of the logo)
- 6 LED long piece (for the ring outline)
- Solder… lots of soldering. See the pictures for more info.
I recommend using a LED-strip that is 2 or 3 wires. Not an APA102 like i did that has 4 wires. Save yourself some work.