Miss Minutes Ghost Clock (Loki)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fan Art Clock of Miss Minutes, a character in the television series Loki produced by Marvel Studios.
- Rating
- 5 / 5
- Likes
- 404
- Downloads
- 629
- Makes
- 8
- Views
- 3,863
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Fan Art Clock of Miss Minutes, a character in the television series Loki produced by Marvel Studios. You can use the clock as a wall clock and as a table clock.
The clock has a size of about 199 mm x 171 mm x 26,8 mm. The dial has a thickness of 4 mm. Movements (clockwork) with a case size of 56 mm x 56 mm can be used.
The ghost variant of Miss Minutes was part of Loki - Season 2, Episode 3 :)
Other Variants of Miss Minutes
 |  |
Movement and Clock Hands
You can use any movement with a maximum case size of 56 mm x 56 mm x 20 mm. I use the following movement (Amazon DE): https://www.amazon.de/gp/product/B00TPI4FKE
The following movement should also fit (Amazon US): https://www.amazon.com/dp/B0B3CSGHTW
This movements have a thread length of 9 mm.
You can use the clock hands from your movement or use (and modify) the 3D modeled clock hands (see Files).
Printing
The clock is printed in 4 colors (light grey or white, grey or silver, black, white). 4 color/filament changes are required (light grey or white ➝ grey or silver ➝ black ➝ white ➝ black).
- 00.00 - 24.00 mm: light grey or white
- 24.00 - 24.60 mm: grey or silver (slightly darker than the first color)
- 24.60 - 25.40 mm: black
- 25.40 - 26.20 mm: white
- 26.20 - 26.80 mm: black
The filament/color change using PrusaSlicer is described here: https://help.prusa3d.com/article/color-change_1687
Important: The dimensions given are the actual dimensions of the 3D model. Please check in your slicer preview whether the color changes are set correctly. The layers to be set for the color changes depend on the selected layer height.
Supports are only required for the hole for the movement shaft.
It is possible to work with variable layer heights to speed up the printing, for example:
- 00.00 - 23.00 mm: 0.3 mm layer height
- 23.00 - 26.80 mm: 0.2 mm layer height
Updates
- 2023-12-16: Upload STEP files
My Print Settings
- Printer: Prusa MK4 (0.4 mm nozzle)
- Rafts: No
- Supports: Yes
- Resolution: 0.3 / 0.2 mm (variable layer heights)
- Infill: 20 %
- Filament brand: Amazon Basics, Prusament
- Filament color: Light Grey, Galaxy Silver, Jet Black, White
- Filament material: PLA