Counting matching models…
TL;DR First layer calibration howto which works for anyone. To get a free Spool of Prusament use one of this Promo Links for your Printer Order. Prusa Core One+ Kit Prusa Core One Prusa Core One L Prusa XL Collection tools, 3D printing…
Print with PETG, without support, z=0,3 100% infill You can use nails or screws. Cable Clip SMALL for cable fi4,8mm, use nail 1,5x20mm Cable Clip Middle for cable fi6,5mm, use nail 2x25mm Cable Clip Large for cable fi10mm, use screew…
Fan Art Clock of Miss Minutes , a character in the television series Loki produced by Marvel Studios . You can use the clock as a wall clock and as a table clock. The clock has a size of about 155 mm x 170 mm x 26.4 mm. The dial has a…
Hello everyone, here are the print instructions: 0,3mm 5 perimeters (for additional strength) 100% Infill PLA or PETG (PLA is strong enough to open countless bottles) No supports needed Happy Printing and Na zdraví!
I have seen several models that used the principle of a spiral (and even made similar ones myself), but they are not strong and stable enough. Therefore, I decided to use not 1 spiral and connection, but 8 spirals and 8 mounts. Lamp…
If you like my model, you can reward me by purchasing it on Cults3D at the link below: https://cults3d.com/en/3d-model/game/balancing-hat-only-40-minutes-print
Hard to print? Try this one This is another take on the idea of a quick-to-print phone stand to make lots of and put around the house. If you don't need your phone to be elevated and are looking for something that takes up less space,…
It's a spinning top optimized for a good runtime, but without the need for additional parts (like a ball bearing for the tip). My best run was two and a half minutes. Print with 100% infill and random seam placement . Sanding the tip…
The source marked this model as adult content.
Emergency office paper clip set You can choose from four sizes S (3 cm), M (4 cm), L (6 cm) or XL (8 cm). They're not perfectly strong like their metal counterparts, but they'll work as emergency paper clips and you can print them out in…
I wanted to give my 20-minute phone stand a more interesting design and solve the problem of it being easy to knock over in portrait mode. Making the base hexagonal seemed like the perfect option. As an added bonus, there is now nothing…
It features: 1- Outer measure (main rule: mm/inch) 2- Inner measure (main rule: mm/inch) 3- Depth measure (depth rule: mm / main rule: inch DON´T use main rule for depth measures) 4- Phone Stand 5- Keychain hole 6- Spring ideal for a…
In only 9 minutes you can have a Keychain multitool, with 9 tools. Printed 0.2 layer 60% infill, im used Petg Carbon. -Supermarket Trolley 1€Coin -Big hex bit -Small hex bit -Screwdriver -3mm Tyre recommended change -30mm Ruler -Bottle…
When my Friends and family members ask about what else can be 3d printed that isn´t a toy, (I mostly print toys and puzzles at home) I show them what I print for work, (mostly tools and gages) that's why this little and useful item came…
Fan Art Clock of Miss Minutes , a character in the television series Loki produced by Marvel Studios . You can use the clock as a wall clock and as a table clock. The clock has a size of about 199 mm x 171 mm x 26,8 mm. The dial has a…
Groki is the ultimate chonky companion you didn’t know you needed! This adorable little hippo prints in just 22 minutes and comes ready to waddle into your life with pure squishy energy. With its round belly, tiny feet, and big curious…
This is the most important first print you need to print. It will allow you to Live adjust Z Hight. Very short print. In 5 minutes you will set the printer to print beautiful models. It is set to test PLA or PETG. If you use the stl,…
Fan Art Clock of Miss Minutes , a character in the television series Loki produced by Marvel Studios . You can use the clock as a wall clock and as a table clock. The clock has a size of about 155 mm x 170 mm x 26.8 mm. The dial has a…
Scroll through your social media feed or sit back and enjoy your favorite video content with this universal phone stand. This model only takes 6.81 grams of filament to print, yet it is surprisingly sturdy and stable. The print time is 47…
First of all, this is not my own design . If you like it, please send a tip to NirDobovizki . Having identified some drawbacks in the original design regarding easy printability I pulled the STL on TinkerCAD and took a few minutes of my…
I have a problem - it's difficult to demonstrate a 3D printer to your guests - you show them the printer, send a small print, and .... it will be ready after they leave. So I designed this model with the explicit purpose of being able to…
I found myself printing huge test models to figure out the correct settings for a M600 colour-change. After a couple of frustrating tries i decided to construct this mini-test print. It works flawless. Colour-change at layer 11 in prusa…
miss minutes clock modeled to look like the main look/pose from the show cut out channels added for led in version 2 of model to allow for lighting to be ran with translucent orange pla.
This model is a test print to test if your elephant foot compensation settings are working properly. This design has varying interior and exterior angles which makes it perfect for elephant foot testing. PRINT SETTINGS: Bottom Layers: 3…
I would put down glue stick, and also increase fan speed a little bit. I find this really useful for printing functional parts, the chain photo was printed in just under 3 hours on my MK3S+, and it would have taken over 7 without this…
Description Get ready for Christmas baking with our Christmas cookie cutters model! This set includes all the essential shapes you need for your holiday treats. Each cutter is 50 mm in size, with a height of 10 mm and a thickness of 0.8…
Top part of face shield. Compatible with Prusa Face Shield. full height (20 mm) 0.4 mm nozzle (E3D v6) 0.2 mm layer prints in ~33 minutes per piece ! Add 2nd stack (20 pcs) for total print time 11 hours - 640 g (overnight printing). Print…
Please like this model if you find it useful. A few likes goes a long way so I can make more. Thanks :) Any of the following sound like you? z-offset changes every print! Probe does not seem to work First layer is terrible but it was…
Ultra thin and minimalist bookmark & phone stand. Very short print time (13 minutes) and plastic consumption (2.87 grams). Stand convenient to carry - especially if you like to read. The stand allows you to slightly adjust the angle of…
Top part of face shield. Compatible with Prusa Face Shield. full height 0.4 mm nozzle (E3D v6) 0.2 mm layer prints in ~33 minutes ! This is a remix but I cannot find author of the .scad model. Print instructions There is a diagonal cut in…
Introducing a mechanical digital clock with numbers strangely arranged. Technical highlights Usually, intermittent motion mechanism such as Geneva drive is necessary to decrease the number of the motors of mechanical digital clock.…
Quick Facts Design: Antlers sized to fit Labubu figures—snap attachment, no glue or tools needed. Speed: Complete print in 31 minutes 42 seconds —perfect for last-minute holiday printing. Function: Adds festive personality to Labubu…
What do you do with this less than a meter worth of filament? Print this little buddy! It takes just 10 minutes, and vase mode prints are always cool to watch and touch. Then play with it or give it to children for them to have fun (not…
Hello! This tire chock was made because my collection of Lego Speed Champion Cars kept rolling of their shelf (which I should have just fixed). I figured that maybe some other people might have the same problem or might just use them as…
Two versions of boxes for business cards. Printing is very fast.
Just another simple bed level test.
Encontre este modelo en tingiverse pero no lo he vuelto a encotrar para ponerlo como referencia. Lo modifique y agregue el hueco para las llaves. I found this model from thingiverse, but I cant found again to reference it. I've modified…
A Miss Minutes drink coaster I made. The coaster itself is 100mm inside diameter with a 2mm high lip around the outside. Each color is separated into their own file for printing and assembly with some CA or Super Glue. Designed in Fusion…
just add a pause at the layer heights and change the filament color try it do it in petg as I have had issues with pla and my fish DO NOT USE ABS OR MARKERS AS IT, KILLS THE FISH (I learnt the hard way )
These are motivational message ear savers for use with surgical masks. I have optimized print settings for 0.6mm nozzle on Prusa I3 MK3S printers. I am using amazon basics PETG. Print instructions The settings are in the file. These print…
very quick and and useful scraper
Accurate filament measure. Prepared and sized for JAYO spools. Very fast printing - 20 minutes.
I made a project from scratch of the TVA logo and Miss Minutes from the Loki series. These are two decorative book holders. I made them 2cm thick. There is a vertical support that can be integrated into a book so that you can no longer…
A 3D Printable design of Miss Minutes, the anthropomorphic clock-like A.I from the Marvel Loki TV Series on Disney+.
Wait 5 minutes sign for MMU Printing.
The perfect tool for cleaning every nook and cranny of your car windshield. Prints in under 45 minutes without supports and easy to assemble, using only 29g of filament. How to use guide : The handle clips in the plate mounts TIP : You…
Another designer made this kill flash for our Airsoft optic, the Vortex Razor AMG UH-1. However, when I tried printing theirs, my Bambu Labs printer had issues printing the honeycomb style. The slicer would not recognize the honeycombs…
A slight modification of the original design to accommodate the taller standard atomic clock mechanism. This should fit any of the atomic clock motions similar to: https://www.amazon.com/gp/product/B0BWXG8VGX (Approximate mechanism…
Update, check out V2 here : https://www.printables.com/model/1035150-hand-crank-can-chiller-v2-work-in-progress Proudly presenting the hand powered can chiller. Beside this device you need a container with a layer of ice on wich the can…
I recently got new filament for my prusa printer and was having trouble with default profiles. XYZ cube doesn't feature any meaningful tests, and benchy is taking too long to print. I needed something simpler that would let me see if…
A quick and easy keychain phone holder, prints under 30 minutes and uses less than 5 grams of filament To achieve maximum efficiency, please use 0.28mm layer height and 5% Support Cubic infill
It's the end of Loki season 2! And Miss Minutes quite frankly can be super evil! Anyway, here's a coaster/action figure stand of the AI who may be creepiest villain at the TVA. Just follow the attached photo for when to change filament…
UPDATE: 3/9/2025 : V2 NOW AVAILABLE! IT HAS A PAUSE AT LAYER 12 TO DROP IN THE NFC TAG. ONLY 41 MINUTES TO PRINT I THOUGHT OF CONVERTING THE SCREW/HOOK HOLES INTO MAGNET SLOTS AS WELL BUT I DONT THINK EVERYONE WOULD HAVE SOMETHING…
Miss Minutes Clock - 12hr fix & Filament Change Remix
This is an easy to print and pretty usefull gadget your Smart Phone. Layer Hight: 0.25 mm Infill: 5% or higher Supports: Not required Nozzle: 0.4 mm
detailed instructions: Print 2 of them, or 4, or 6, just make sure it is a multiple of 2 If you have sandpaper AND glue: sand where they connect and glue them wait so you don't glue your mouth shut If you have scotch tape: tape them…
Need a quick and fun print? 📞⚡ This minimalist toy phone is the ultimate fast project for your 3D printer. It features a sleek, rounded design with textured buttons, and the best part? It takes only 33 minutes to print! Perfect for kids,…
There are Many of these but ive customised this one to test at my 99% of the time print settings As I always print in PETG at 0.3 I wanted to make a quick level print test so when ive levelled my dual Z steppers i can see quickly that all…
Minimalist phone stand for your desk. Print using vase mode in just 30 minutes and 20 grams of material. Compatible with larger phones and cases. Avoids obstructing bottom-center of screen for gestures. Phone not included. Print settings…
Chin for face shields compatible with Prusa Face Shield. Print instructions Fan is at 100% but if you print all 50 pieces, you can turn it off completely. Temperature is 270°C but still the extruder looses steps. This does not affect…
itis perfect to throw
This is book mark Under 5 minutes to print
This hook is great for use with small Brad nails, uses 2 and will print in 6 minutes on PRUSA. It is strong and the minihook can hole a coat on a coat hanger. I added a bigger one ( gcode) scaled up 3x to 300 percent all axis and it will…
This is a set of hands designed for the remixed clock face to allow them to be attached without having a clock mechanism installed into the clockface. The other design remixed was a peg to cover the hole, but it did not have a way to…
A desk clock with retrograde minutes and jumping hours mechanisms. Retrograde minutes : The minute hand moves not rotational but reciprocal Jumping hour : Numerical hour display that changes instantly largest part size : 174 x 99mm How to…
Hey all, I would like to share with you my design of Miss Minutes clock. You can recognize this figure from Marvel TV show - Loki. Model is easily printable just with the layer switch without MMU need. Regarding to assembly - you will…
I made the feet for my 45 minute carbon Scott branded SCBA tank so it won't roll around. Designed with slots on the side to have a strip of velcro to go around the tanks to secure it. There is enough space for thin double sided tape so…
Customization parts set for Bandai's 30 Minute Sisters line. The hands are 1:12 scale.
Ten model został zaprojektowany jako szybki i skuteczny test pierwszej warstwy dla drukarek 3D FDM. Pozwala w kilka minut sprawdzić, czy stół jest poprawnie wypoziomowany, a wysokość Z‑offsetu ustawiona idealnie. Dzięki temu możesz łatwo…
Quick Facts Design: Zero assembly required; the functional spring mechanism prints in a single piece. Speed: Prints in under 20 minutes (19m 50s). Function: Durable, integrated mechanism ensures a strong, reliable seal on bags.…
I made theese Easter eggs with Blender, they are really nice and most impuortant you'll need only 30 minutes to print one of these eggs (in the slicer you need to scale the model to 800%). Theese eggs are not really big but they help you…
split in parts for multi color
print with skirt, and i hope its usefull for you
You know how it goes – pieces from every Montessori toy start disappearing after a while. You haven't modeled anything yet, but you're looking to see if you can find the exact STL with the dimensions you need? Consider this a huge…
newly modeled miss minutes clock in style of new season of loki. Ghost miss minutes clock with hanger or stand for multiple ways to display. Link to Clock Movement:…
A spinning top that prints quickly and has long spin times. Print with 100% infill.
Introduction PluTop Mon is the first 3D printed top that spns more than 10 minutes . It is also the longest running 3D printed top. It can fit in any pocket. Turn it anywhere. Assembly Guide ·Print all the parts. (Spare ring is included)…
Bunnies Easter Earrings - quick print 5 minutes Printing notes Size of the bunny = 13x29x2mm Printing time: approx. 5 minutes Material: PLA Nozzle: 0.4 mm AMS: not required Supports: not required; gluing the base plate is recommended for…
Designed in fusion 360. No supports and multicolor system are required. For single color printers add a pause at layer 17 for color changing the letters. Thanks for viewing, please like, rate and upload your makes. Check out my profile…
Hello everybody! I've always wanted one of those hanging picture setups in my room and as a maker i thought this was the perfect occasion to print one! Printing: The print itself is really easy, it only takes seven minutes for a couple to…
Creates a small batch of curly spaghetti .20mm thick. Note: Can stick to nozzle and can have unexpected results. Enjoy!
Great guitar pick for any guitar (: Printing time is only 2 MINUTES!
Download files from: (original files here: https://www.thingiverse.com/thing:4895693 ) Start Prusa Slicer Load files Click slice Use the slider and click the + to add a color change at 22.4 and 23.4 mm Click slice Export the file and…
Miss Minutes from 1893, Remixed to go with my other “Loki" model prints.
On enclosed printers (X1C | P1S) we're told to have the glass door open or the top glass removed,I think there's an alternative, here is my solution: a glass riser that prints really fast and is minimalist.I did this design in around 36…
Wall Mountable Miss Minutes from the Loki series when she turns into a ghost clock.
Print it as you like. Choose your model, with or without hole. I print it in 4 minutes with 0.6 nozzle, 0.3 layer height and 40/80mm/s. What time can you achive for a still nice looking tree?
When leveling hotbed using silicone hose and Klipper, the amount you are told to tighten or loosen the screws is displayed in units of hh:mm. This simple jig helps to ease this process and eliminate eternal trial and error guessing the…
A quick Halloween decoration: six little flat ghosts, each with cut-out eyes, a different mouth, waving arms and a wavy hem, and two holes in the head to thread them on twine or ribbon. Hang them across a window, along the mantelpiece or…
It's a simple cable clip for 5mm ⌀ diameter cables. It prints in only 10 minutes! Printer: PRUSA MK3S+ Filament: PLA Supports: No Infill: 100 ø Print time: 10 min
Clock for Miss Minutes 1893
Mini version of Miss Minutes designed in fusion 360 Miss Minutes is an artificially intelligent holographic lifeform at the Time Variance Authority. Unlike all organic TVA employees, she was always aware of the true nature of the…
Increased size to 60mm * 80mm To fit movement https://www.aliexpress.com/item/1005001456871300.html?spm=a2g Supports for movement area and hook.
Have you ever wanted to mount your HexScraper somewhere but couldn't find a mount for it? This is the model for you! You can print this little insert in less than five minutes, and after inserting a 6x3mm magnet into the hole, you can…
Mini version of Miss Minutes / Black and White Disguise As someone passed by on a horse, Renslayer advised Miss Minutes to get back in case someone saw her digital appearance. Miss Minutes then changed her appearance to black and white.…
The source marked this model as adult content.
Tested with 10mm steel ball bearings (~4g each, 20-pack from Amazon). The printed bar weighs approximately 11g in PLA. With the original pocket position (~87mm from pivot), the counterweight overpowers the 5-ball side and the bar won't…
Creality Ender 5 Plus Saves about 15 minutes of 3D printing time on every print for me ... Cool down Heat Bed Quicker. Normally it can take about half an hour to cool the Build Plate down to a temperature, 32°, I want before removing a…
