PluTop Mon — 10+ minutes rotation
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The first 3D printed top that spns more than 10 minutes.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 50
- Makes
- 2
- Views
- 478
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction
PluTop Mon is the first 3D printed top that spns more than 10 minutes.
It is also the longest running 3D printed top.
It can fit in any pocket. Turn it anywhere.
Assembly Guide
·Print all the parts. (Spare ring is included)
·Insert a 3mm steel ball (ceramic is better) into the hole under the core. You should hear a click.
·Insert a 6901 (12*24*6mm) bearing into the core. Please insert it carefully.
·Mount the ring on the bearing tightly.
·Just turn it!
Print Settings
0.1~0.15 layer height
80% Rectilinear infill
2 walls
Check 'Detect thin walls'
My record is 10' 52". Can you break this record?