Camera bracket hanger for Tapo c200
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bracket for the Tapo C200/C210 camera to be hung around an object or mounted on a flange using the built in "flap".
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 73
- Makes
- 0
- Views
- 1,062
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A bracket to hang your Tapo C200 or C210 camera around an object or use the built in “flap” to attach it to a thin flange. Camera sits at a 55 degree angle to cover full floor area. The built in screw (optional) can be used to stabilize the camera/bracket. Step file of the attachment piece is available under files to modify to different camera models. There is of course room for improvement such as a strain relief for the cable and a more clever design of the assembly between camera attachment and main body but for now it will do.
Assembly:
Due to challenges with the shape of the geometry that attaches to the camera i decided to print it separately. i used a screw (Ø4mm, length 10-15mm) to assemble the pieces together. You might also get away with glue.
Printing:
I printed mine on a Prusa Mini+, PLA, 0,6mm nozzle and 0,3mm layer height. Support material is only needed in the bottom of the thread. Support enforcer as a cylinder 25x25x6mm. something like this:
Print orientation like this:
