Camera bracket hanger for Tapo c200
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket for the Tapo C200/C210 camera to be hung around an object or mounted on a flange using the built in "flap".
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 1062
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A bracket to hang your Tapo C200 or C210 camera around an object or use the built in “flap” to attach it to a thin flange. Camera sits at a 55 degree angle to cover full floor area. The built in screw (optional) can be used to stabilize the camera/bracket. Step file of the attachment piece is available under files to modify to different camera models. There is of course room for improvement such as a strain relief for the cable and a more clever design of the assembly between camera attachment and main body but for now it will do.
Assembly:
Due to challenges with the shape of the geometry that attaches to the camera i decided to print it separately. i used a screw (Ø4mm, length 10-15mm) to assemble the pieces together. You might also get away with glue.
Printing:
I printed mine on a Prusa Mini+, PLA, 0,6mm nozzle and 0,3mm layer height. Support material is only needed in the bottom of the thread. Support enforcer as a cylinder 25x25x6mm. something like this:
Print orientation like this:
