1 / 7
Case for Seeed Studio's ReSpeaker Mic Array v2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Includes stand. Snap together.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 167
- Makes
- 0
- Views
- 1,608
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Back has tabs that snap into holes in the front after inserting Mic Array, no screws or glue needed.
The case sits in the optional base. If you have right angle cables, you can sit it in the base with the connectors pointing straight down and then install the cables from the bottom. If you don't have right angle connectors, you can connect the cables and sit the case on the base with the connectors pointing to the side.
For a usb cable I used: StarTech.com 0.5m Up Angled Micro USB Cable.
Notes:
I only used supports for the tabs on the bottom piece.