Dresser Drawer Track Guide Replacement - Bassett
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement drawer track guide for a Bassett dresser.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 80
- Makes
- 0
- Views
- 499
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Replacement drawer track guide for a Bassett dresser. A very niche part, but hopefully somebody can find some use for it.
Bought this dresser 2nd-hand, and one of the drawer guides (shown in white) was already broken. A second guide broke due to the relatively mediocre design of the part, so I designed this to replace the broken guides, using the same mounting hardware (minus the staples).
Printed in Hatchbox PETG black, in the settings described in the attached gcode. I would recommend printing this slowly and at high infill in a higher strength material with 4+ perimeter walls (PETG, ASA, ABS, PC) rather than PLA, as it is holding the majority of the weight of the drawer, when extended. Probably better to print even slower than I did, but the part seems to be holding up well.
Also including the Fusion360 in case anyone would like to modify.