1 / 5
Door stopper with interchangeable slide in place figurines
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A door stop where you can choose from one of the 7 available figurines as a decoration
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 21
- Makes
- 0
- Views
- 202
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Here's a door stopper with a twist: you can choose one of the available figurines to change it daily, having one available for each day :-)
- one of the base plates (there's a flat one and a spiked variant for better grip on the carpet); max height is 10 mm
- one, more or all available figurines
- 3 layers, 20-40% infill for the base plate; doesn't matter much for the figurines
How to print
- print the base plate vertically, no supports needed
- print the figurines flat side towards the bed, with a color change if you want (PrusaSlicer should recommend this automatically)
- plate should match the carpet or the door, figurine should be in contrast with them
Install
- slide the figurine into the slot
- place door stopper under the door
- let the door push the figurine in place or adjust manually as needed