Mt Dew Willie the Hillbilly Hand Replacements
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€19.26 – €23.54 net (excluding VAT)
For file: Mt Dew Hillbilly Left Hand_22h30m_0.20mm_215C_PLA_ENDER3S1PRO.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €21.40 excluding VAT (range midpoint).
- Weight reported by the author
- 245 g
- Print time reported by the author
- 22.5 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Replacement hands for 1960's Mt Dew Willie the Hillbilly model.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 19
- Makes
- 0
- Views
- 349
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Share Alike
These hands are replacements for the iconic 1960's Mt Dew Willie the Hillbilly statue that was used to promote Mt Dew products in general stores and gas stations. A customer sent me a dilapidated hand that was almost into pieces with a request to reproduce a pair of replacement hands. After searching online for several hours it was determined that there just wasn't any model available for this project. Utilizing 3D scanning equipment and modeling software the replacements were able to be recreated.
If you like what I'm doing here, please consider making a small donation.
*This model was produced using Creality Scan Lizard 3D Scanner and refined with Autodesk Meshmixer software. It was sliced using PrusaSlicer so the wrist section and hand section could be divided. The Wrist needed to be hollow to accept the mounting hardware and the hand needed to have infill to print properly.