Fire Tablet 10 (2019) Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount for Fire HD Tablet 10 (2019 version). Also should fit tablets that are ~0.4" (10mm) thick
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 96
- Makes
- 0
- Views
- 753
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Share Alike
I bought a refurbished Fire Tablet 10 to run as a Fully Kiosk client for my Home Assistant setup and couldn't find any decent wall mounts that were pretty minimal. The goal for this was to create a minimal mount with enough space behind the device to run a power cable through the wall but also keep the tablet accessible and removable if needed.
This is the cable I found to use: https://smarthomemount.com/collections/power/products/slim-power-cable-male-usb-a-to-90-degree-male-usb-c
You'll need to print two of them and mount each separately - or use the 2x STL file below.
I printed without supports and it worked great at 0.2mm layer height on a Crealty Ender 3. The overhang should be manageable for most printers.
I would recommend starting with the bottom one and leveling using the two ‘bumps’ that surround the mounting holes. Once that is screwed in (I used regular 3/16" drywall anchors) place the tablet on in the holder and fit the top. You do not need to push down a bunch on the top as I noticed it “clamped” down a bit more once it was screwed into the wall. When I fit the top the tablet slid out fairly easily, but once everything was screwed in it has a tight fit but still removable.
There is enough space to run a power cable behind the tablet (I'm just still waiting on mine so photos don't show that).