1 / 3
SV06 Heatbed Strain Relief - FOR NEW MODELS
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sovol started including a strain relief in the new SV06 iterations. This remix allows you to replace the stock one.
- Rating
- 4.5 / 5
- Likes
- 10
- Downloads
- 118
- Makes
- 2
- Views
- 615
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I was able to print this on a Sovol SV06 with 15% infill, default walls, and .20mm layer height, PETG. Supports are most likely required. I used PrusaSlicer's organic supports.
EDIT: Make sure you use loctite, lock washers, or locking nuts when you install the screws. A few months down the line, I noticed my screws started to get a little loose from the vibrations. An easy fix, sure, but it's annoying to have to peel up the magnetic sheet again. Don't make the same mistake I did!