DJI S800 ESC LED Dome
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dome to identify arm number, protect LED and diffuse light for the ESC LEDs on the DJI S800.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 98
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
The LED of DJI S800 ESCs is soldered in the bottom of the PCB and protrudes. This makes very easy to damage the LED if you not take care when leaving the arm in the ground. Also, l wanted to label the arms to know instantly which motor I'm installing in the frame...
Solution: Make labelled LED domes.
Taking as base the Adafruit's LED Dome, I've modded it removing the little wings and adding a label with the motor number. The dome not only protects the LED but also doubles as a tulip making easy to see the light especially from sides.
If you think it deserves downloading... Please leave a Like!
Be proud, Show your makes!
Print Settings
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0,2
Infill:
50%
Notes:
Six labelled domes and one "dome only" STLs provided. I provide individual files to allow everyone to arrange them according to the size of their build platform.
The "dome only" file is not needed, I'm providing it for people who want domes without labels.
Download the choosen STLs and print them The print will be mainly perimeters in the dome, this is a very low-intensive filament print you can use 50% infill.
Print preferably in white or translucent (White is strongly recommended)
Post-Printing
Painting the motor & installing.
I've painted the motor numbers with a black permanent marker to make the label more visible.
I've installed them with a very thin double side tape. The kind of tape used to attach the mobile phone screens. I recommend using that tape but other glues can be used.
Category: R/C Vehicles