Roland Aira Compact Stackable Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stack-able dust cover or "deck-saver" for Roland Aira Compact models. Tested with T-8 and S-1. Should also fit J-6.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 208
- Makes
- 1
- Views
- 1,240
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
Stack-able dust cover for these tiny Roland devices. I needed some case to be able to store them in my limited storage space and came up with this.
Fits snugly both my T-8 and S-1 without issues. I made case to be as minimal as possible to contain all controls. Also can be used as a stand to raise device around 15mm.
Four circular slots are designed to fit rubber stands of another device to provide stack-ability. There are four slots inside for foam or felt pads. Also might be usable when printed in some flex material but bear in mind there are thin layers on some places.
Printing
Designed to be printed in 0.3mm layer height (0.2mm first layer) but should be OK with 0.2mm all around. Lip is designed with ~0.45mm perimeter width (with Arachne, I used 0.85mm lip width). I used 3 perimeters (2 should also be OK), 2 layers both top and bottom and 5% rectilinear infill. All that just to have good enough rigidity/weight ratio. With these settings i got around 47g weight with random PLA I found at home. It Is a bit crunchy when forcing a bend but that should not be standard use-case. I would suggest using something like PET-G so that the lip is a bit more sturdy.
Post-process
There should be none involved except sticking few small felt/foam/rubber pads inside.
Future
Just let me know if any change is needed. I am willing to make also version for E-4 (But I don't plan to own it).
Disclaimer
I am definitely not affiliated with Roland in any way except being customer/user/fan.