Counting matching models…
This is a cover/case I designed for the Roland AIRA S-1 Tweak Synth. It was carefully designed to print well, snap on and stay securely attached, while protecting the knobs. A lot of effort went into designing it so that it's easy to pop…
Hey everyone, YVR3DPrints here with a 2 tier stand model for the new Roland AIRA Compact series instruments. This was a fun project and wanted to build something for me and my kid to both play at the same time without getting too much in…
Table stand for 2 Roland AIRA Compact units. 5 pieces, no glue or screws required. Material: PLA+ @ 0.28 No supports
Here are models of Tenma Helmets from TV series Gosei Sentai Dairanger. Print instructions Category: 3D Printer Accessories
If you're looking for an easy to print stand for your Roland Aira Compact (S-1 | J-6 | T-8 | E-4 | P-6) device – look no further! The device fits snug and secure in the stand and doesn't wobble. I've accounted for all the necessary…
Voici un petit fichier pour y accueillir un ruban led pour éclairé la surface de travail de l'imprimante . Il y a de chaque coté un trou pour passé le câble d'alimentation du ruban led . Il y a possibilité de mettre un interrupteur sur…
Table stand for Roland AIRA Compact units. 4 pieces, no glue or screws required.
Stack-able dust cover for these tiny Roland devices. I needed some case to be able to store them in my limited storage space and came up with this. Fits snugly both my T-8 and S-1 without issues. I made case to be as minimal as possible…
This is a remix of one of @CalebKraft’s 6mm trim pot caps, originally designed for the FM-1. They fit the 6mm trim pot knobs found on most desktop mini synths, including the Korg Volca series, Roland AIRA Compact series, Behringer Mini…
Elevated stand so you can place another device bellow it and pass the cables from behind. I tweaked the height so it works well with my MIDI keyboard, but will also work when using two Airas together (see pics). It leaves enough space…
The great original model requires much support, which is a certain challenge when removing. I have created a new model that offers some advantages: you can print individual parts as needed the individual brushes can even be printed…
Fit with stock magnets. Airassist for better cutting edges and cooling.
FR Cette cheminée est dérivée de l’excellent site Hero's Hoard ( http://www.heroshoard.com/inn-and-tavern ) et permet un meilleur effet visuel avec l'incrustation d'une led à effet de flamme. La led utilisée est https://amzn.to/3M0QxFL Ce…
Figura de colección de Aira del anime Dandadan
It is a generic cover for the Roland Aira Compact series. It should fit on all models. If you want to print the device with a tight fit, reduce the scale of the x and y components. In my case for the T-8 Beatmachine on a Prusa MK4 I set…
It bothered me that the cabling of the laser module on the Ortur Laser Master 2 Pro was sagging. Sometimes the (lighter) material placed under the laser was touched by this and shifted. Therefore I constructed a cable support for the OLM…
Double Stand for Roland AIRA Compact Units (S-1, T-8, etc.) Platform angles: 25° and 45° Two versions are provided: • with hexagonal groove pattern • plain Assembly requires three rods to hold the sides together. I used solid aluminium…
Not sure does it really works, but at least it blows the laser smoke away. Any tips and suggestions are welcome. Fits a normal 6mm OD tube. I will add the “angled” air input version later. Printed with ASA, 40% infill, 4 perimeters but…
Ähnlich zu Modell von Jardanovak Simular to the modell of Jardanovak , https://www.printables.com/de/model/413546-sculpfun-s9-air-assist-hose-holder but for tube Ø12x2 (Ø12xØ8)
Emblem from Dairanger If you are interested in more tokusatsu themed 3d print files like Henshin belts, check out my etsy, patreon and website! Feel free to message me with model suggestions here or over on my website. Thanks, enjoy and…
JTS Airacuda max barrel weaver airgun
Ich habe bei meinem Laser eigentlich immer den Airassist an, um einem zu schnellen Verschmutzen der Linse vorzubeugen. Nur beim Gravieren von Holz lasse ich ihn meistens aus, um Schmauchspuren zu verhindern. Leider ist der mitgelieferte…
A transport case or cover for the Roland AIRA S-1 synthesizer. No supports 40% Infill PETG Print large flat side down The case has a lot of tollerance to make sure it fits. If your printer is well calibrated, you may want to scale the…
I found that the lock mechanism inside Rocco's Stuff Mini Vault could get stuck (permanently) quite easily. In this remix I added screwholes for Self tapping (plastic) screws “STP39 2.0x8.0 - T6” or similar. Only 3 are needed. This allows…
Is attached to the rear of the laser module at the original existing holes. The magnetic protective cover is simply rotated 90 degrees. Nozzle opening is 0.8mm, so I printed it on a SLA printer. You lose 10mm on the Y-axis, so best to…
I designed my own Version of MAIRA's affordable DIY belt tensioner. Much smaller and more rigid with an excluded PSU. Documentation: https://mairapp.com/home/maira-seat-belt-tensioner-kit/ Please read both manuals before starting this…
Neje A40640 laser air assist with optional safety. Attention: even if the guard blocks most of the light, you still have to use goggles for your own safety. Don't print the guard too big, because the smoke still needs some gap to escape.…
No supports required. Material PLA or PET-G
JTS Airacuda Magazine Organizer. This holds 22 caliber magazines. The tray nests in the lid when shooting.
Original magnets from stock NOSE fits. Mine stock nose broke. Second version is for 10x5x3 magnet. No airassist just stock fan cooling thrue nose and laser body. Good for engraving for cutting use my AIRASSIST version.…
Replacement of original
Quickstring SCAR but with altered nubs to be removable, as well as an optional tensioner cap. Use the alternate outer core with the clamping ring if the default doesn't secure the core enough. -11-16-2025 fixed malformed inner body stl…
Bubble lights, we all love them but they have one obvious and annoying flaw, they use C7 nightlight bulbs which burn out leaving you with a dead bubble light despite the fact that the rest of the light is still good. Well no more! .. I am…
Chimairamon Digimon Creature Model
This is mod to at air assist to Atomstack X7 Pro Laser Engraver Machine. I printed parts in Prusament PETG. Parts needed: 1-2m of 4x6 4x6 (ID 4mm, OD 6mm) silicon hose - Airassist 1x M5x50 Bolt ( ISO 4762 ) - Airassist knob 1x M3x6 Bolt (…
This will print a frame that will fit nicely over top of your Roland AIRA Compact device (P-6/S-1/T-8/J-6) while leaving the knobs and buttons exposed for jamming on the go. Hook the ends into a shoulder strap (took mine from an old…
Roland MX-1 AIRA mixer rack mount The shape of the upper part allows to close the front up with a rack standard metal plate The small bottom part ( optionnal) can be printed in 2 or 1 part. it's purpose is to fill the gap in the rack. I…
This is another representative of inserts for the box. It's a set for inexpensive boxes from AliExpress that helped me organize my screws. For a small cost, you can flexibly arrange your items. These inserts are optimized for printing in…
The source marked this model as adult content.
Schälchen für AIRAJ Werkzeugteile-Box https://de.aliexpress.com/item/1005006338849477.html?spm=a2g0o.order_list.order_list_main.53.7f7b5c5flCTCbg&gatewayAdapt=glo2deu
Lampe a bande leds 5V, pour imprimante 3D , avec profilé 2020 ( modifiable ) .
This is a remix from https://www.thingiverse.com/thing:398515 Bonjour Inspiré de ce travail : https://www.thingiverse.com/thing:2959937 Merci beaucoup jubidev J’ai adapté le concept pour des led de type G4 (12V) plus courantes et assez…
The project is still WIP 📖 The Story & Philosophy The GNUchair is not just a piece of furniture; it is a manifesto on the Right to Repair and the Democratization of Design . In a market flooded with cheap, unrepairable plastic chairs or…
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…
Nouvelle version de l'éclairage led de la tête d'impression Prusa i3, Meilleur centrage de l'éclairage, Ensemble protection ventilateur et support éclairage monobloc, Passage de fils de 0.6 de diamètre, Fiche mâle-femelle pour démontage…
Éclairage de la tête d'impression sur Prusa I3. Matériels : 1 interrupteur 12v 1 led navette 12v Fil d'alimentation multi-brins Le support de led est vissé à l'aide des vis de fixations du ventilateur d'extrudeur. Les fils sont soudés…
support bande led imprimé en PLA sur ma elegoo pour pour éclairer ma Prusa.
The bracket consists of two parts that must be glued together. A pyramid-shaped tenon makes it easier to position them. Each bracket is attached to the Skadis panel using one M4 screw. The file is created so that M4 brass threaded insert…
Holder for the remington airacobra magazine and the single-shot insert. Nice for keeping it loaded without losing pellets or risking safety. Uses M3 machine screws and bolts (2 of each) Magnet hole fits neodynium magnets of 15x2mm (since…
Přidáno připojení kartáče ETA. Doporučeno ASA nebo alespoň PETG.
This model allows you to mount a Roland AIRA Compact synth into a Eurorack case. There is only 8mm space at the rear of the synth, so you will need to use compact right-angled connectors there if you want to use the TRS MIDI or USB-C…
Schälchen für AIRAJ Werkzeugteile-Box https://de.aliexpress.com/item/1005006338849477.html?spm=a2g0o.order_list.order_list_main.53.7f7b5c5flCTCbg&gatewayAdapt=glo2deu
Nouvelle version de l'éclairage led de la tête d'impression Prusa i3, Meilleur centrage de l'éclairage, Ensemble protection ventilateur et support éclairage monobloc, Passage de fils de 0.6 de diamètre, Fiche mâle-femelle pour démontage…
Utilisation d'une lampe IKEA pour l'éclairage du plateau, libéré de la place sur le plan de travail. Ce petit support permet de l'utiliser sans le pied, les vis sont récupérées pour être utilisé avec la pièce.
Support éclairage pour bambulab x1c Placer un éclairage indépendant sur le couvercle de la X1C permet d’ouvrir le couvercle pour la ventilation. Ce système est incompatible avec l’AMS placé sur la machine. Le système est fixé sur le verre…
Update as of December 29, 2021: corrected some mistakes, lowered focusholder and shifted buck converter up for more clearance to heatsink, sdapted measures for long laserholder to get better clearances added a little 3.5mm addon for the…
Éclairage de la tête d'impression sur Prusa I3. Matériels : 1 interrupteur 12v 1 led navette 12v Fil d'alimentation multi-brins Le support de led est vissé à l'aide des vis de fixations du ventilateur d'extrudeur. Les fils sont soudés…
Éclairage LED pour caméra action X'TREM 4K-DUAL selfie (vendue en France chez Carrefour). Ce dispositif est a installé par dessus la “coque” d'origine. Imprimé en PLA Geeetech transparent pour plus de luminosité, possible de le faire en…
Support rectangulaire venant se mettre sur des poteaux bois afin d'y accueillir un éclairage LED Dimensions intérieures : 90 x 90 cm Dimensions extérieures : 100 X 100 cm
rehausseur éclairage aquarium pour une vitre 5mm
A mount for the Ikea Skadis board that fits the Roland AIRA series if they use JWR's case/cover. You need to print three hooks per mount to make it work. There is a slim version and a full width version. Print two of the mounts. Only…
The Airakoraptor is a 3D model of a real bird, made for display, education, and collectors. This intricately designed model is ideal for tabletop setups, dioramas, or as a thoughtful gift for wildlife enthusiasts and educators alike. The…
Ma chambre de mon airassist avait cassé j'ai donc recrée un model pour la remplacer il y a un fichier avec un filetage pour y visser un tubing de 4 et un fichier plein ou pouvez y percé ce que vous voulez attention as bien augmente le…
Distanzring mit Kabeldurchführung für Lampe Airam Sansa. Auch für nachträgliche Montage geeignet, bei der Kabeldurchführung ist ein auftrennbarer Spalt.
A new alternative component for the Vairan 3rd, the open-source modular mecha: This time, it’s an alternative shoulder part. While the original piece features two halves that rotate relative to each other, this new shoulder unit…
PETG aus Haltbarkeitsgründen Schichthöhe 0,15 Perimeter 4
After the Pauldron I propose a new upgrade for the Core Set of the Vairan 3rd, the open-source modular mecha. This time, it’s a new forearm design. I liked the stocky, heavy look of the original, but it had a peculiar aesthetic that…
The bracket consists of two parts that must be glued together. A pyramid-shaped tenon makes it easier to position them. Each bracket is attached to the Skadis panel using one M4 screw. The file is created so that M4 brass threaded insert…
No supports required. Material PLA or PET-G
Model: Jeep Wrangler YJ de 1993 Support d'éclairage de plaque immatriculation avec base + bulle ( deux couleurs ) Base réalisée en ABS pour la longévité de la pièce et aussi la bulle réalisée en deux couleur en PETG Noir et transparents.…
COMO ESTA ECHO POR IA TIENE DEFECTOS MANOS, PIES, OREJA, ETC (NO ES PERFECTO LA IA) TRATO DE QUE SALGA BIEN LA IA
COMO ESTA ECHO POR IA TIENE DEFECTOS MANOS, PIES, OREJA, ETC (NO ES PERFECTO LA IA) TRATO DE QUE SALGA BIEN LA IA
I designed my own Version of MAIRA's affordable DIY belt tensioner. Much smaller and more rigid with an excluded PSU. Documentation: https://mairapp.com/home/maira-seat-belt-tensioner-kit/ Please read both manuals before starting this…
This is a remix from https://www.thingiverse.com/thing:398515 Bonjour Inspiré de ce travail : https://www.thingiverse.com/thing:2959937 Merci beaucoup jubidev J’ai adapté le concept pour des led de type G4 (12V) plus courantes et assez…
Lampe a bande leds 5V, pour imprimante 3D , avec profilé 2020 ( modifiable ) .
nozzle accept 8mm hose holes are for magnets 6mm in diameter - press fit and 3mm deep
Bairan vyťahovací bajonet na riadaciu jednotku na olejový horák Material: ASA Výplň: 100%
This is a remix of TVS’ AIRAJ AliExpress Box Inserts , adapted specifically for the 18-grid version of the AIRAJ organizer boxes. What’s new in this remix: Corner boxes resized for a much better fit Hinge-side boxes adjusted to match…
Mount a sling stud to your JTS Airacuda. Uses 3 M4 screws, nuts and washers. Print with lots of walls + high infill. I used petg, but abs/asa, or petg-cf would be better. I used tree supports over ~25° on build plate only. There are…
Model: Jeep Wrangler YJ de 1993 Support d'éclairage de plaque immatriculation avec base + bulle ( deux couleurs ) Base réalisée en ABS pour la longévité de la pièce et aussi la bulle réalisée en deux couleur en PETG Noir et transparents.…
COMO ESTA ECHO POR IA TIENE DEFECTOS MANOS, PIES, OREJA, ETC (NO ES PERFECTO LA IA) TRATO DE QUE SALGA BIEN LA IA
I designed a custom 3D printed replacement bracket that brings your headphones back to life. This part took a long time to design, test fit, modify, plus filming and editing the video tutorial below. I hope it helps you fix your headset.…
vase mode, 0.25mm nossle, 0.32 layer width, ABS! print with a hot chamber, abs is hard to print with such a small nossle, go slow and steady, vase mode 265C nossle, i go 65C ambient and 60mms
The package comes only with 2 of each. Not great if you want to cut them in smaller sections. Mine was missing a bracket OOB. Parts fit and work but still somewhat WIP; getting the fit just right might require playing around with the…
