1 / 6
UV Sterilizer for Espresso Machine Water Tank
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A UV lamp in a test tube that you put in a water tank.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 13
- Makes
- 0
- Views
- 218
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Cork needs to be printed with TPE not TPU , TPE is UV resistant and Ozone resistant while TPU is not.
Materials:
- TPE - 85A - 1.75mm 3D Printer Filament
- 80ml Glass Test Tubes, 25×200mm Round Bottom Test Tubes
- USB 2.0 Female Pigtail Cable
- Flat Slim FPC USB 2.0 Type A Male to USB 2.0 Type A Male Data Cable
- Mini 3W Timer Aquarium Clean Light (UV bulb and Timer PSU)
- Gardner Bender 07315001126 LTB-400 Liquid Electrical Tape (White)
Instructions:
Take the Mini 3W UV apart. It's only held in with a rubber stopper. Crimp the wires of the USB Pig tails to the leads of the UV bulb. Splice the power supply for the USB plug , pay attention to the polarity.
Use Liquid Tape to water proof the USB cork from inside and outside
Optionally add a desiccant.