spool holder offset on the side for Flashforge Adv5MPro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spool Holder for Adventurer 5MPro
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 154
- Makes
- 2
- Views
- 851
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
Spool holder to put on the side of the Flashforge Adv5Mpro rather than the original one which is at the back.
you can add a piece of PFTE tubing so that the spool slides more easily.
There is a version that also allows you to put nozzles at the back, not necessarily practical but I optimized the space.
You will need to provide M3 screws slightly longer than the original one.
I printed it in 0.2 on the Flashforge Adv5MPro in PETG and 15% Gyroide filling.
No support is needed
-------------------------------------------------------------
Porte bobine pour mettre sur le côte de la Flashforge Adv5Mpro plutot que celui d'origine qui est a l'arrière.
vous pouvez ajouter un morceau de tube PFTE afin que la bobine glisse plus facilement.
il y a une version qui permet aussi de mettre des nozzles a l'arriere, pas forcement pratique mais j'ai optimiser l'espace.
Il faudra prévoir des vis M3 légérement plus longue que celle d'origine.
Je l'ai imprimer en 0.2 sur la Flashforge Adv5MPro en PETG et 15% remplissage Gyroide.
Aucun support n'est necessaire