Gopro adapter Simple Microphone Pop filter and Ammon MS-12 Mini Foldable Desktop Microphone
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.46 – €3.00 net (excluding VAT)
For file: filter-connector.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.73 excluding VAT (range midpoint).
- Weight reported by the author
- 36 g
- Print time reported by the author
- 2.64 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Adapter for Simple Microphone Pop filter and Ammon MS-12 Mini Foldable De
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 27
- Makes
- 0
- Views
- 455
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Share Alike
Adapter for Simple Microphone Pop filter -- https://www.thingiverse.com/thing:1108999
and Ammon MS-12 Mini Foldable Desktop Microphone Stand
Required hardware
- 2x M3 16mm bolts for mounting to the base stand
- 2x M3 10mm bolts for mounting to the pop filter
- 4x M3 nut
Optional Hardware
This is needed for mounting each GoPro extension flange
- 3x M5 20mm bolt
- 3x M5 Nut
Library customization
The following parameters were changed in gopro_mounts_mooncactus.scad for better fitting of the joints:
gopro_nut_d= 9.3;
gopro_connector_th2= 2.7;
gopro_connector_gap= 3.3;
Repository URL
The repository contains libraries required to export to stl --
https://github.com/avolkov/openscad-designs/tree/master/pop-filter-holder