Parametrizable HDD Adaptor 2.5" > 3.5" with optional sliders for HP DeskPro 600 G1 cases
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adaptor designed to fit a 2.5" HDD into a 3.5" HDD slot. Sliders could be generated which will fit into a HP…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 90
- Makes
- 1
- Views
- 815
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- GNU General Public License v2.0
An adaptor designed to fit a 2.5" HDD into a 3.5" HDD slot. Sliders could be generated which will fit into a HP ProDesk 600 G1 computer case. Multiple adaptors could be stacked and screwed together to fit multiple 2.5" HDDs into a single 3.5" HDD slot.
The model is parametric and can be adjusted to fit other cases.
Source code and further information is also available on my github page.
2023-10-28 - Small tweaks to better fit the case. Add more space for drive connecting screwheads.
Print Settings
Printer Brand:
Prusa
Printer:
MINI
Rafts:
No
Supports:
No
Infill:
10%
Filament:
Notes:
Even though I read somewhere that PLA is not suitable for HDD adaptors due to disks getting hot and PLA not being able to withstand the heat, I have been using PLA so far and haven't noticed any issues. I'm running a NAS where the disks are around 30°C in a room with ~20°C. And even on hot summer days the disks won't get near to any temperature where PLA would start to soften. PLA will begin to deform or warp at 60-65°C. Most HDDs are rated for 50°C, some for up to 60°C. So PLA should be fine for most use cases.
Category: Computer