Parametrizable HDD Adaptor 2.5" > 3.5" with optional sliders for HP DeskPro 600 G1 cases
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adaptor designed to fit a 2.5" HDD into a 3.5" HDD slot. Sliders could be generated which will fit into a HP…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 90
- Wydruki
- 1
- Wyświetlenia
- 815
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v2.0
An adaptor designed to fit a 2.5" HDD into a 3.5" HDD slot. Sliders could be generated which will fit into a HP ProDesk 600 G1 computer case. Multiple adaptors could be stacked and screwed together to fit multiple 2.5" HDDs into a single 3.5" HDD slot.
The model is parametric and can be adjusted to fit other cases.
Source code and further information is also available on my github page.
2023-10-28 - Small tweaks to better fit the case. Add more space for drive connecting screwheads.
Print Settings
Printer Brand:
Prusa
Printer:
MINI
Rafts:
No
Supports:
No
Infill:
10%
Filament:
Notes:
Even though I read somewhere that PLA is not suitable for HDD adaptors due to disks getting hot and PLA not being able to withstand the heat, I have been using PLA so far and haven't noticed any issues. I'm running a NAS where the disks are around 30°C in a room with ~20°C. And even on hot summer days the disks won't get near to any temperature where PLA would start to soften. PLA will begin to deform or warp at 60-65°C. Most HDDs are rated for 50°C, some for up to 60°C. So PLA should be fine for most use cases.
Category: Computer