1 / 4
Philips Airfryer HD9200/90 Timer Knob
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a simple knob replacement for the Philips HD9200 Airfryer.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 380
- Makes
- 1
- Views
- 1,788
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
A simple knob replacement for the Philips HD9200 Airfryer.
Designed to fit the timer knob, but I think it would also fit the temperature knob. I used a sharpie to put marks at the 10-minute intervals. With the knob installed, the 0-minute mark is at the 9oclock position and the 60-minute mark at the 12oclock position. It's not exact, but hey, cooking never is.
Printing settings I used:
- Recommend to use PETG. In my prototyping I had problems with PLA shearing the internal crossbar.
- 15% infill
- 5 perimeters to make sure it's strong enough
- No supports/brim needed