Threaded Prusa Filament Sensor Cover with for PC4-M10 PTFE Tube Connector
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.52 – €0.63 net (excluding VAT)
For file: fs-cover-mmu2s - PC4-M10_0.2mm_PLA_MK3S_41m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.57 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 40.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This improved file has an integrated thread for a standard PC4-M10 PTFE tube push connector.
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 172
- Makes
- 4
- Views
- 1,550
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
This improved file has an integrated thread for a standard PC4-M10 PTFE tube push connector. This allows for you to print your own threaded part for the best push connector option rather than having to break out the soldering iron for a threaded insert after you've tracked it down and ordered it on ebay. If your PTFE tube breaks off in the connector, no problem, just unthread it and put in a new one, it's now just that easy since I know you probably got them in a pack of 10 ;)
The original Prusa .STL file for the extruder filament sensor upgrade for the MK3S to MMU2S can be found Here: https://www.prusa3d.com/prusa-i3-printable-parts/ if you need it. It is the download labeled "MK3orMK25toMMU2S_upgrade_stl" in the extruder sub folder. HOWEVER, I obviously recommend printing and using the improved design as it allows for easier use, maintenance, and fewer loading errors.
Pair with These Parts for near 100% filament loading success rate:
https://www.prusaprinters.org/prints/62789-threaded-mmu-selector-front-plate-for-pc4-m10-ptfe
2.5mm or 3mm ID / 4mm OD PTFE Tube
Updated 04-08-21: added chamfer on PTFE tube mating face to ensure tube alignment and further decrease loading/unloading errors.
Print Settings
Printer Brand:
Prusa
Printer:
MMU2s
Rafts:
No
Supports:
No
Resolution:
.2 mm
Infill:
20%
Filament:
3D-Fuel PLA Glass Filled - Industrial Grey
Notes:
3 perimeters recommended
Category: 3D Printer Parts