Replicator 1 - 2 - 2X Filament dust filter
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.38 – €0.47 net (excluding VAT)
For file: filament_filter_v03_02mm_petg_mk3smmu2s_33m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.43 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 33 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This small device traps dust in a small sponge before it enters the extruder.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 105
- Makes
- 0
- Views
- 1,043
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This small device traps dust in a small sponge before it enters the extruder. In some cases it can also be used to easily lubricate the filament just before it is extruded.
The adapter is designed to fit the Replicator (1), Replicator 2 and Replicator 2X extruders.
Protecting your 3D printer's extruder from foreign particles is an important part of keeping the machine maintenance-free. This adapter makes it easy to keep the filament clean.
Related thing: http://www.thingiverse.com/thing:492067
I transferred these files from Thingiverse. They were made by CreativeTools.
Place a couple drops of vegetable oil on the sponge to make your pinter print even better! I printed this for my MK3S + MMU2S and it works great!
Print instructions
1 - Download the STL file
2 - 3D print it as is with standard medium or fine settings
3 - Cut two small pieces of sponge and place them into the filter case
4 - Close the case with the lid and two standard 3 mm screws
5 - Unload the filament from your Replicator 1, 2 or 2X
6 - Remove the filament guide tube
7 - Insert the loose end of the filament into the adapter.
8 - Make sure that it passes through the sponge and slides smoothly
9 - Insert the adapter into the Replicator's extruder hole
10 - Insert the filament guide tube into the top part of the adapter
11 - Enjoy hours and hours of dust-free 3D print extrusion
Check this Youtube video for more information: http://www.youtube.com/watch?v=CUG2MQkVAU0
Every now and then open the adapter and check the sponge for dust. Replace if necessary.
In some cases filament can jam or cause uneven 3D prints if the friction in the extruder's filament tube is too high. This adapter can also be used to lubricate the filament just before it enters the extruder.
http://www.creativetools.se/makerbot-replicator-1-2-filament-dust-filter