Counting matching models…
Note: For assembly instructions please follow the original post Version I: I initially pritned the Neo Thang cooler for the hot ended of my Ender 3 Max Neo. I however was wondering why both necks were so long. So I shorted both. This…
Print approx. €7.99–€9.77 excl. taxPreliminary estimate for one variant
This HDD / SSD Caddy Is fully funtional. It clicks in perfectly. It also shows the lights of the drive status. Compatibility It works on a HP Proliant DL360 G7 Server (Tested) but should also work on any HP Servers that use the same Caddy…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
This is a mount for mounting a Reolink E1 (Pro) camera to the wall. The mount can be used up and down. The holes for mounting to the Reolink mounting bracket are 3mm, the ones for mounting the mount to the wall are 4mm. If you use 4mm…
Print approx. €3.21–€3.92 excl. taxPreliminary estimate for one variant
I designed this f-clamp holder to store my clamps in the most compact way on the wall. The holder is intentional massive and bulky to withstand the weight and forces that are put on the object. For regular and small clamps, have a look at…
Print approx. €21.36–€26.11 excl. taxPreliminary estimate for PETGSource material: PET
---------------------- ONE SERIES, ONE FAMILY Adult model but in standing position: Holiday Christmas Deer - Low Poly Adult model but in laying position: Laying Christmas Deer - Low Poly Youngster model: Youngster Christmas Deer - Low…
Print approx. €3.29–€4.02 excl. taxPreliminary estimate for one variant
Coconut Capybara – Burbaloni Loliloli edition! This adorable little creature is half coconut, half capybara, and 100% brainrot joy. Inspired by the Italian meme universe, this chill buddy is perfect for fans of the absurd and wholesome. ✅…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
Megalopolis Pipe Dice Tower with a story! You work deep in the bowels of the megalopolis. Often where man or beast fear to tread. Heavy weapons troopers stand at ready while you work. However, often they are no match for the diseased,…
Print approx. €31.49–€38.48 excl. taxPreliminary estimate for one variant
Platonic solids, a classic. It includes an exhibitor with their names. You can print it in Catalan (Base_40_cat), Spanish (Base_40_es) or English (base_40_en). Combine your favorite colors. New: Also see this new version with a circular…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
The .3mf file has custom orientation & painted supports for the better quality printing.
Print approx. €3.14–€3.84 excl. taxPreliminary estimate for one variant
This innovative bottle holder design serves a dual purpose: it allows you to cool PET drink bottles in lakes and rivers and easily attach them to backpacks. This makes it perfect for outdoor activities like fishing, hiking, and camping.…
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant
Un Evoli avec un anneau afin de faire un porte clef.
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
The Assistive Nail Polish Applicator aids users with low pinch strength to open, apply, and close nail polish. The device can be held by hand, worn on a finger, or worn over the hand. Print Settings Infill : 20% Resolution : 0.3mm…
Luce : Catholic Pilgrim: 2025 Jubilee Based on Drawing and Design by Simone Legno.
Print approx. €7.06–€8.63 excl. taxPreliminary estimate for one variant
A model of the Reolink E1 Pro camera ceiling mount that came in the box. I lost the original one that came with it so I did my best to model another. I don't know what other Reolink cameras this will work with but it was designed for the…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
Stojan na pistoli zásobníky a náboje pro CZ 75. / Stand for pistol, magazines and bullets for CZ 75 Materiál / Materials: PLA+, PETG Tisknuto na / Printer: Kingroon KP3s Adheze na ploše / Rafts: No Podpory / Supports: No Rozlišení /…
Print approx. €7.52–€9.20 excl. taxPreliminary estimate for one variant
I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Hello there! Unfortunately, the centralization of Bitcoin mining continues to increase. But Bitcoin is for everyone! Especially for small people like you and me, Bitcoin offers the opportunity to break out of the system and gain financial…
Print approx. €8.63–€10.55 excl. taxPreliminary estimate for PETGSource material: PET
Jednoduchá polička s použitím (moc děkuji) modelů IKEA Skadis Fusion 360 Models od autora Rod | Stáhněte si zdarma STL model | Printables.com
Created this minus the cube to help learn with Fusion 360. My daughter is learning about Platonic solids in school at the moment. She asked if I could print her a set for each classmate. So this is the end result. Feel free to use however…
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for one variant
Meet Mini Broccoli Buddy , the tiniest and healthiest friend in the Mini Buddies family! 🥦✨ ✅ Adorable & Tiny Design – A fun and quirky desk buddy ✅ Perfect for Desks, Shelves & Collectibles – Small but full of personality ✅ Lightweight &…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
After my quite old ebook reader fell down it immediately broke. The material of the front cover was that much brittle, that it even broke into thousands of tiny pieces when I tried to remove it. Even tough the device is now out of…
As an luthier & printer, I believe the banjo is a perfect instrument for printing since the component that has the biggest effect on tone (the drumhead) is a standard component purchasable at any music store. Printing can even improve on…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Dodecahedron Display (Solid or Vase Mode) Printing Instructions Vase Mode: .3mm layer height Solid Mode: Recommended: .3mm layer height and lightning infill.
Print approx. €2.30–€2.82 excl. taxPreliminary estimate for one variant
This 3D model is a modular heart-shaped pasta cutter, perfect for creating romantic Valentine’s Day ravioli or other pasta shapes. The design consists of three parts: handle , screw , and base , allowing you to mix and match with other…
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
I designed this specifically to hold Holo Taco nail polish bottles. It will hold 8 on each row for a total of 48. It features framing along the base for stability. Printed in PLA. No supports needed.
Print approx. €15.94–€19.49 excl. taxPreliminary estimate for one variant
The model ( IN INCHES ) is designed for a full size unitsrut end. You should be able to smack it in place with your hand, but for bent struts, use a hammer/mallet and tap lightly on the edges. .3mm Draft is good enough and takes about 30…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
Beverage Can Opener against Broken Nails A keychain tool for opening beverage cans preventing broken nails or nail polish. Key Features Anti-slip curved thumb rest for user comfort with dirty or wet fingers Easy tab lead-in enables a…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Made on both the Prusa Mini and Bambu X1C (Bronze on the Bambu and Red on the Prusa Mini)
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
I have my printers in an enclosure as i print in a dusty enviroment. Not only does the enclosure keep the printers clean, it stops drafts and keeps the temperature stable. Problem with that is it can get a bit warm in there when printing…
Print approx. €8.31–€10.16 excl. taxPreliminary estimate for PETGSource material: PET
I was looking for a badge and I found this Cyberpunk badge . Added a hole and a clip in order to be easier to wear. An M3 screw can be used to put the parts together, M3x5.
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
The model should replace the long ladder in the Playmobil City Action 5182 playset. Ideally print it sideways as shown on the picture. Support required. To achieve best results, use a slicer that can generate Tree support. The provided…
I don't like seeing the upper parts of the Z-axes lift during Z calibration, so I remade them to be stronger in the style of the MK4. Trust me, they're solid!
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for PETGSource material: PET
Residents of Hawaii use the Shaka to convey the "Aloha Spirit", a concept of friendship, understanding, compassion, and solidarity among the various ethnic cultures that reside in Hawaii, lacking a direct semantic to literal translation.…
Print approx. €31.35–€38.32 excl. taxPreliminary estimate for one variant
Ich vbrauchte für unseren Opel Rocks E einen Innenspiegel. Diesen habe ich bei Amazon gefunden. Der originale Halter des Spiegels sagte mir nicht so zu, da man ihn hätte Schrauben oder Kleben müssen. Also einen neuen konstruiert. Infill:…
Utensile per rimuovere il filtro dell'olio stampato con ugello da 0,8 . Stampa molto rapida di 2 ore, 0,3mm in PETG, molto resistente. Le misure del filtro le trovate nelle foto, l'importante è che il vostro filtro da lato a lato sia…
Print approx. €2.94–€3.59 excl. taxPreliminary estimate for PETGSource material: PET
A simple instance of the classic Bicylinder Steinmetz Solid , which rolls smoothly in two directions. You can print the model in the given orientation with 0% infill and few supports.
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
One of the g-codes is for the legs while the other is for the Ravioli Cutter itself. If you would like to add different colored tips to the legs, use edit the 3MF and export your own g-code.
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant
Considering the number of parents now needing to teach their kids at home, I designed this simple model to provide a visual learning aid for addition, fractions, etc. They also double as fun play cubes for robot making etc. These could…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
This is my first model I made myself. I looked around at the other No Soliciting signs, but didn't find exactly what I was looking for. So I used Tinkercad to put this one together. My first one I had the letters too tall and it made it…
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant
Full Collection: https://www.printables.com/@TripleGWorkshop/collections/673389 ------------------------------------------------------ Color order Start with White, then Yellow, then Blue. Quick Guide to changing filament~ Have some paper…
Print approx. €3.48–€4.25 excl. taxPreliminary estimate for one variant
A cheerful articulated Broccoli Buddy with wiggly legs that happily dangle over any edge! 🥦 Height: ~80 mm 🦵 Print-in-place articulated legs for fun movement ✨ Designed to bring joy to your kitchen, workspace, or veggie-themed collection…
Print approx. €4.02–€4.91 excl. taxPreliminary estimate for one variant
A friend had a broken dash panel on his old Hilux and wondered if I could replace it. A bit of 3d modelling later and it fits perfectly. I printed this .8mm thick, with two bottom layers in white and two top layers in black, and then…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
This started as radical_rascal 's single-bottle polish holder (originally on Thingiverse ; reuploaded here ). I personally felt I could too easily knock over the single-bottle holder, but the multi-bottle holders were too crowded to…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant
Longer Honeywell cooling fan knob
Hello there. I created The Crown of Katolis for everyone, who love a Netflix Show The Dragon Prince and need own The Crown :-) It is very simple to print and look cool :-) I am fan of Netflix Show The Dragon Prince and I decided and made…
Print approx. €6.54–€7.99 excl. taxPreliminary estimate for one variant
Design Concept The Ravioli Heart Keychain combines a playful design with a romantic theme, making it a perfect accessory or gift for loved ones. Function It serves as a decorative keychain that can be attached to a variety of items such…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
For the Prusa MK3/S, print 12 pentagons in either PETG, PLA or use the STL file to slice for your printer. I used PETG at 20% infill. Print time 41 minutes. Assemble the Dodecahedron using 60 small zip ties , 10cm in length. The angled…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Se trata de aprender a instalar y manejar el banco de trabajo Pyramids and polyhedrons para crear, generar e imprimir los 5 sólidos platónicos . Aunque el banco de trabajo ofrece otras posibilidades solamente nos centraremos en los…
Did you know that you can multiply two numbers using a parabola and a ruler? This template let you easily draw a piece of a parabola. But don't be fooled, it's much more than a simple drawing template… You can draw a parabola , its focus…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
A simplified 3D model of our heatsink, part of a cooler case for Raspberry Pi 4 model B. Use for evaluation of aesthetic only! To be used only with CooliPi 4B CASE. The real heatsink is made from anodised aluminium and is for sale at…
Print approx. €5.20–€6.35 excl. taxPreliminary estimate for PETGSource material: PET
Simple to print (ABS suggested due to heat) for the Mac Mini 2012 edition to allow for extra air flow under the unit. I find during intensive work (video conversions especially) the bottom of the unit gets very hot. I have a fan nearby,…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant
Nastavitelné parametry modelu umožnují v OpenSCAD přizpůsobení pro různé šířky desek. Doporučuji tisk z PET-G kvůli napružení.
Phospholipid Membrane Vesicle Pot : Good luck this is going to be a hard print. Imagine a Tiny Bubble... Think of a phospholipid membrane vesicle like a tiny bubble made of special building blocks called phospholipids. These bubbles are…
Print approx. €35.42–€43.30 excl. taxPreliminary estimate for one variant
This is a model of the Bonesborough Police Precinct from The Owl House. It is 160mm wide, 92mm long and 68mm tall. Print Instructions Printed at 0.2mm layer height. Requires supports on buildplate. If you want to support me, you can do so…
I found the available fan-attachments for the RF100 take up to much space around the printhead, and also sometimes don't produce enough airflow. This cooling solution utilizes a radial fan design and can be attached to the printhead using…
Flashlight mount/holder for an Olight Warrior 4X flashlight, that can be mounted onto walls or cabinets with screws. Screw recesses were designed for #8 wood or drywall screws. The Olight Warrior 4X flashlight pressure fits into the…
Print approx. €2.31–€2.83 excl. taxPreliminary estimate for one variant
This is a simple two color print for the flag of South Carolina. Start printing in blue and switch to white at layer 16 (0.2mm layer height). See the included gcode if you don't know how to layer switch. Let me tell you, tracing out that…
Print approx. €4.48–€5.47 excl. taxPreliminary estimate for one variant
Summary: The original part cooling fan for my Ender 3 broke. I like noctua. I did not want to buy any extra hardware to mount it. It took like 3 months of iteration to land on this design. I've included the .obj, .stl, .3mf, and .gcode…
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for PETGSource material: PET
Porta espiral con forma de pokemon de nombre Poliwag
Print approx. €9.56–€11.68 excl. taxPreliminary estimate for one variant
Hager Isolierstück universN UZ00Z5 modifiziert für den kombinierten Einsatz mit Leitungsführungskanal UZ51A1/UZ52A1 auf Hager Verteilerbaugruppe Reihenklemmelemme UD31A1 /A2. Das von Hager mitgelieferte Isoliertstücksystem auf Kunststoff…
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for PETGSource material: PET
This is the print cooling duct that came default with your Tronxy Crux1's gcode turned into stl. Smaller layer heights is recommended and also a filament that withstands higher temperatures + wear and tear since you will be screwing into…
This is a cooling tower I made that blows air up into and out around the DJI O3 Air Unit when you're configuring a Flywoo Flylens75-85 with the DJI O3 Air Unit. This is so it won't over heat while connected to BetaFlight Configurator (or…
Print approx. €5.71–€6.98 excl. taxPreliminary estimate for PETGSource material: PET
Just wanted to better organize all the types of tapes I have, so I made simple elbow for small shelf. Print instructions Can be use for many purposes, I used it with 16mm (inner diameter of elbow) wooden sticks and made small 2-tier…
A easy model I created to lift my MSI GS75 for better cooling and typing experience, it's designed to have a slightly tight fitting so it won't easily fall out. Print instructions Because of the high temperature it might have to handle,…
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for PETGSource material: PET
The 3D printed holder clip for the Tolino Shine 3 eBook is a small, lightweight clip that attaches to the back of the eBook. It is made of strong, durable plastic that resists damage and wear. The clip has a special shape that is…
In our case we already had a secure nail in the wall where my wife wanted to hang her violin, and did not want to drive two screws or anchors into the sheetrock. I would recommend ensuring that the nail you use is directly into a wall…
Print approx. €4.97–€6.07 excl. taxPreliminary estimate for one variant
Hinge for my Bemis toilet seat broke. Tried to epoxy it back together. Didn't work so modeled a replacement part. If this is a design flaw and you happen to have the same toilet seat hope this saves you some time. Printed on a Creality…
Print approx. €2.17–€2.66 excl. taxPreliminary estimate for one variant
This is a very quick little print for a replacement foot for the Kolink VOID case series. It may work on other Kolink cases, however, we haven't tested that - simply because we don't have any others! I whipped this together after we had…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
A simple lens hood for the 135mm f2,8 Soligor lens. There are multiple versions of this lens, this one is with a 55mm filter thread and Minolta MD mount. Print instructions PETG or similar material would be best. PLA is too brittle. I…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for PETGSource material: PET
Tapa del molinillo de cafe.
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
Policejní blikač rudá/modrá barva dle zapojení: https://pihrt.com/elektronika/458-ne556-policejni-stroboblikac-tht-3d
A cauliflower/broccoli tag to label your vegetable patch. Part of a tag collection. Three-colored (two switches needed) cauliflower: yellow (or whatever)→white→green broccoli: yellow (or whatever)→green→ different green 5% infill is…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
This is a custom nail polish holder that I made for the Vanreesa UV Kit since all the labels are on the caps.. Printed with a modifier to not include the top layers of the holder.
Polička na sprchovou tyč o průměru 24mm, jednoduchý upevňovací mechanismus. Bude možná potřeba jemně obrousit vnitřní hrany upevňovací vložky, ale jinak funguje a drží hezky. Shower pole shelf, hole diameter 24mm, simple fastening insert.…
Print approx. €9.93–€12.13 excl. taxPreliminary estimate for one variant
The Sieciech denar, dating from the end of the 11th century, was the first non-princely monetary issue in Poland. How to print Print at a side, with raft and supports.
Print approx. €5.44–€6.65 excl. taxPreliminary estimate for one variant
Created models of directly and indirectly identical cubic solids that correspond to the virtual models appearing in the problems of the "Rotating solids" module on the interactive Mathematikus website. See…
Leicht zu drucken und sehr stabil durch optimalen Faserverlauf.
Print approx. €6.91–€8.45 excl. taxPreliminary estimate for one variant
Nose ornament Tolita-Tumaco : 500 BCE–300 CE An Emblem of Power and Skill in Ancient Coastal America The Tolita-Tumaco culture, flourishing from approximately 500 BCE to 300 CE along the Pacific coast of present-day Colombia and Ecuador,…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
In a small Neolithic village nestled along the fertile banks of the Danube river , two souls, bound by a love as enduring as the stone tools they crafted, found solace in each other’s presence. Their days were filled with shared…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
Spiral consists of two games designed by Raymond Gallardo. The Gift: A two-player abstract strategy game with a dose of luck; cards contained in a trick determine where you must play. It's a a mashup of David Parlett's Tantony and Cameron…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Držák na kameru pro kontrolu tiskárny když nejsem doma. Skloněný o 30st.
Both of us have a Quad Lock case on our phone. And this way we can both charge our phone when using GPS The print needs a little polishing after printing it since i didnt want to have a flat face to print it upon. Also recommended to…
I designed it for kids in a mini escape room/save Christmas sort of game. It spells a word when solved. Harder than it looks. Must print the top color in red or it won't work. I included a presliced file for Prusa Mk3S with color change…
Print approx. €5.21–€6.37 excl. taxPreliminary estimate for one variant
The vertical graph y = f (x) is rotated around the x axis. Volume of the rotating body: The used function: (0.05 x^2 + cos(x) + 2) / 2 : x ∈ [0, 10] (cm) V = 119.94 cm^3 The function is written on the bottom of the vase. I made it for my…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
a practical phone holder with the possibility of passing an elbow cable underneath. The logo is that of 2 French rappers named Bigflo and Oli. Print with 0.4 nozzle, 0.2 layer, support enabled but touching build plate.
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for one variant
Jednoduchy držiak malej stretch baliacej folie do jednej ruky. Pri balení si môžeš brzdiť odvijanie palcom ruky aby bola folia pevne napnutá. Pri vkladaní rolky stlač spolu k sebe rozdelený koniec držiaka a nasaď rolku. Tak isto aj pri…
Print approx. €6.09–€7.44 excl. taxPreliminary estimate for PETGSource material: PET
Drilling into the phenolic top is a giant pain, and if you mess up you have ruined the top. I wanted to use the predrilled holes in the table to mount my dustright dust collection box, but none of the holes lined up. So I modeled the…
Print approx. €3.69–€4.51 excl. taxPreliminary estimate for one variant
2x deska z hornbachu 18x200 libovolná délka. 4x šroubek samořezný se zápustnou hlavou pro zajištění polohy (předvrtat)
Print approx. €6.45–€7.88 excl. taxPreliminary estimate for PETGSource material: PET
just a small simple sign, print it in black and white and you only need to change the color once. best printed in petg because of its uv and temperature resistance.
Print approx. €4.55–€5.57 excl. taxPreliminary estimate for one variant
C'est un bouchon de type “capuchon” qui permet de protéger un OLight Baldr S. Il est imprimé en PETG à 20%. 22.15mm de diamètre intérieur. 26.05mm diamètre extérieur. 8mm de hauteur. This is a basic cap to protect an OLight Baldr S.…
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
This bracket is for mounting the Somfy Eolis 3D RTS Wind Sensor to the rail of a Sunsetter awning. There is really no flat level surface on the Sunsetter awning rail to mount this sensor, plus I didn't want to drill holes in my rail. So,…
This prints in 6 identical pieces. Once printed, you have to glue them together. Glue the round end of one piece to the flat end of another piece. I like to glue 3 pieces together to form a 3 way corner. I do the same with the other 3.…
Replacing Part for your shower cabin.. It holds the side glass in place preventing it from slide.
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
.STL needs to be scaled up 10x, I will re-upload the correct one, .bgcode is made for 0.25mm nozzle 0.05mm layer height and PLA so there is a good detail in font.
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant
Big lithopane of St.Nikolina.Monastery Nimnik
Print approx. €14.07–€17.20 excl. taxPreliminary estimate for one variant
Tactile image of the Brazil's Northeast region. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to texts (if literate in Braille). To…
3D figurky pro stolní hru Fantom staré Prahy - retro verze z osmdesátých let. Tisknul jsem na MK3S+, tryska 0.25 mm, vrstva 0.05 ULTRADETAIL, podpěry, PLA. Insert pro tuto hru zde:
Print approx. €1.82–€2.22 excl. taxPreliminary estimate for one variant
L'ho stampato in PETG ma anche PLA va bene. ho utilizzato una Prusa M4KS impostando i seguenti parametri: altezza: 0,25 structural 3 perimetri 15% infill senza supporti
