1 / 1
Desiccant drier cage for use with filament driers — image 1

Desiccant drier cage for use with filament driers

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a reengineering of the a desiccant drier by Kyaenos on another site.

Rating
0 / 5
Likes
5
Downloads
59
Makes
0
Views
493
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

This is a re-engineering of a desiccant drier I saw on another site. I created this model in Fusion 360

  • The original model screwed at the centre, allowing the edges to flex and leak desiccant. I added threads to the outside cover edge for a secure seal
  • Added inner lip to the cover to secure the inside perimeter 
  • Created a fill and drain port
  • Created a funnel and spout that can be screwed into the port for hands and mess free transfers

I am not convinced this is a worthwhile endeavour, microwaves are much faster. Let me know what you think.

  1. Makes sure you print in ABS for heat resistance. PETG ones can and have melted
  2. Use a .28 layer height for the main body and expect a 10 hour print on a Bambu X1CC in regular mode
  3. All other parts need to be printed at 2.0 for threads to work.
  4. Heat soak your printer with bed set to 100 degrees for at least an hour if printing on a Bambu X1CC
  5. It may be tough to screw the top cover in so just push it in and it will ‘clip’ in. Then you ran rotate the cover to tighten 

Tags