Housing for DIY vactrol
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Currently I'm trying to build a DIY Synth and some modules require for the control voltage a vactrol which is simply a…
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 111
- Makes
- 1
- Views
- 1,007
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Currently I'm trying to build a DIY Synth and some modules require for the control voltage a vactrol which is simply a LED and a LDR (Light Dependent Resistor).
Most of the time you see people using a shrinking tube oder just tape to get these two together but I thought I wanna print something. So here it is. A 3D printed housing.
The LDR goes into the tube and the LED into the outer part. After that you can slide the tube into the housing.
With PLA it's a little bit lose but it makes space for a drop of super glue. With PETG it just fits perfectly.