1 / 4
CR10 Max Creality sonic pad holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
CR10 Max Creality sonic pad holder
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 65
- Makes
- 0
- Views
- 574
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Sonic pad holder for a CR10-Max
Uses the front two M3 holes that holds the bottom plate.
You will need to source two M3x12 bolts, the original bolts aren't long enough
Prints fine with no support.
You might have to remove a small string of filament in the countersunk holes when the part is done.
Mount the sonic pad and tighten the two bolts in the arms so it stays at the angle you want.
Remember to check that the bed clears if you want the sonic pad at a steeper angle